{"title":"Vans (RV) Parts","description":"","products":[{"product_id":"the-nose-job-two","title":"THE Nose JOB TWO","description":"\u003ctd valign=\"top\"\u003e\n     After many requests and making dozens of  custom units, we are proud to offer this variation of our product  THE NOSE JOB TWO  as a partial solution to the nose gear leg fears of many RV-A model builders, current owners and potential buyers of these wonderful aircraft. Many of you requested a kit that would not require the fitting of a new fairing.\u003cbr\u003e\u003cbr\u003e\r\n\r\nThe preparation and fitting of the new fairing is a complex problem for a non-builder and most dont wish to deal with it. Also many finished airplanes have very expensive and elaborate paint jobs and this is a deterrent to many people as well. So in response to the demand here is a NOSE JOB TWO kit that will fit under the stock Vans fairing and provide the same protection as our original unit. We now feel our product is the most logical, simple and inexpensive device that can be manufactured and installed in an effort to address these gear leg concerns.\u003cbr\u003e\u003cbr\u003e\r\n\r\nThis product allows the Vans nose gear leg to function as designed without interfering with its dynamics or operation in any way. The product only comes into play when the forces on the gear leg, if allowed to increase further, would become greater than the gear leg was designed to see or handle without permanent damage to itself or the aircraft. When operating your aircraft from an unimproved surface i.e. grass, dirt, poor runway surface or in an emergency off field landing this device could help prevent a costly repair, a propeller strike, engine disassembly for inspection or other damage may be avoided not to mention a dreaded possible flip over we have seen so many times.\u003c\/td\u003e\u003cp\u003eDimensions: 4X5X19\u003c\/p\u003e","brand":"eSHOP.AERO","offers":[{"title":"05-12364","offer_id":47796714897700,"sku":"","price":491.4,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/1428\/0484\/products\/05-12364.jpg?v=1704106370"},{"product_id":"the-snapper","title":"THE Snapper","description":"\u003ctd valign=\"top\"\u003e\n     The Snapper (Tool for canopy escape to break shards of plastic after flip-over for escape). This tool was developed specifically for the RVs. This little tool could really save the day in the event of a flip over in your RV. We learned that almost all flip overs result in the canopy being broken and cracked. At first glance one would say that is a good thing, and should help facilitate a speedy exit.\u003cbr\u003e\u003cbr\u003e\r\n\r\nNot the case, it seems the partially broken canopy has sharp shards of Plexiglas that are impossible to break off with your bare hands.\u003cbr\u003e\u003cbr\u003e\r\n\r\nThis very small, lightweight (less than two oz.) aluminum escape tool when carried in your airplane could really save the day. It makes short work of breaking away the shards of plastic up to ¼ thick. This tool is laser cut .125, heat treated, aircraft grade aluminum, de-burred, and tumbled to eliminate sharp edges. Because it is very thin, it allows you to carry it in your plane with just a piece of Velcro to hold it in a location where it is easily accessible should you find the need for it.\u003c\/td\u003e","brand":"eSHOP.AERO","offers":[{"title":"05-12378","offer_id":47810903671076,"sku":"","price":14.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/1428\/0484\/products\/05-12378.jpg?v=1704301155"},{"product_id":"rv-10-rv-14-u-1024-nose-wheel-spacer","title":"RV-10 RV-14 U-1024 Nose Wheel Spacer","description":"\u003ctd valign=\"top\"\u003e\nThis spacer is a part specified by Vans in the RV-10 and RV-14 instruction manual. We CNC machine this part to the specifications set by Vans to give you a perfectly dimensionally accurate part to hold on your nosegear wheel pants.\u003cbr\u003e\u003cbr\u003e\r\n\r\nYou are probably getting toward the end of your project if you are looking at this part. Go ahead and spend a few hours finishing up some other items on your aircraft and this part can be made for you.\u003cbr\u003e\u003cbr\u003e\r\n\r\nAfter we CNC machine this part, we also deburr all edges so it is ready to bolt right onto your aircraft.\u003c\/td\u003e","brand":"eSHOP.AERO","offers":[{"title":"05-12907 \/ U-1024","offer_id":47813466521892,"sku":"","price":51.3,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/1428\/0484\/products\/05-12907.jpg?v=1704316555"},{"product_id":"quality-jack-points","title":"Quality Jack Points","description":"\u003ctd valign=\"top\"\u003e\n    Quality Jack Points. (Very high quality jack points for most aircraft wing installations and jacks).\u003cbr\u003e\u003cbr\u003e\r\n\r\nThis part was developed specifically for use on the RVs (or almost any aircraft). These little accessories can really save the day when jacking up your RV or other aircraft.\u003cbr\u003e\u003cbr\u003e\r\n\r\nMost RV owners are using a bolt or tie-down ring, not designed, or safe for the task of jacking up their aircraft safely. Many are using a plastic part that was supplied by Vans (No longer available) for this job that was prone to failure.  When this part fails, the wing jack will slide off and penetrate the wing causing very serious, costly damages.\u003cbr\u003e\u003cbr\u003e\r\n\r\nThese very small, lightweight (less than two oz.) aircraft grade aluminum Jack Points can make jacking your aircraft a simple and safe task.  These Jack Points incorporate a grade eight 3\/8X 16 plated stud that fits the wing thread that cant fail causing damage.\u003cbr\u003e\u003cbr\u003e \r\n\r\nThe heat-treated, aircraft grade aluminum body, is de-burred, and tumbled to eliminate sharp edges and includes an attached nylon spacer to protect the wing skins painted surfaces. These parts are small and light weight so you may want to carry them in your plane should you find the need for them away from home.\u003cbr\u003e\u003cbr\u003e \r\n\r\nSold as a pair.\u003c\/td\u003e","brand":"eSHOP.AERO","offers":[{"title":"05-12379","offer_id":47818080813348,"sku":"","price":35.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/1428\/0484\/products\/05-12379a.jpg?v=1704370574"},{"product_id":"almost-a-14-seating-mod-for-rv7-rv7a-rv9-rv9a","title":"Almost A 14 - Seating MOD FOR RV7 \/ RV7A \/ RV9 \/ RV9A","description":"\u003ctd valign=\"top\"\u003e\n   This very inexpensive easy to install kit can make your airplane feel like it grew-up providing an all-around roomier cockpit and adding to the enjoyment and comfort of you and your passengers every time you fly your airplane. This will make your RV6 \/ RV6A \/ RV7 \/ RV7A \/ RV9 \/ RV9A slider feel as spacious as a RV-14 and save you 40K or 50K dollars, not to mention thousands of hours of work.\u003cbr\u003e\u003cbr\u003e\r\n\r\nYou can install this kit in an hour or two and get years of use from it without breaking the bank. Every one of these installed so far gets the same reaction, Why didnt I do this a long time ago? Everyone who sits in a plane with this modification wants one for their RV.\u003c\/td\u003e\u003cp\u003eDimensions: 6X6X48\u003c\/p\u003e","brand":"eSHOP.AERO","offers":[{"title":"05-12485","offer_id":47822950760740,"sku":"","price":343.44,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/1428\/0484\/products\/05-12367.jpg?v=1704458355"},{"product_id":"the-lip-skid","title":"THE LIP Skid","description":"\u003ctd valign=\"top\"\u003e\n     Prevents nose gear from digging into turf on dirt and grass runways.\u003cbr\u003e\u003cbr\u003e\r\n\r\nThis device was created to help prevent flip-overs of the Vans RV-A Models on irregular surfaces. It installs in the bottom of the nose gear, providing surface area to keep the gear leg from digging in on contact. Installation only takes a few minutes and can possibly prevent a flip-over and serious damage to your aircraft. The center post is precision machined from 4130 grade aircraft steel as is the skid plate. Assembled and heat treated to a 45 rockwell, then zinc plated to provide a lifetime of protection for your aircraft. This comes with a vibration preventing O-ring for inside the gear leg and complete installation instructions to install inside the wheel pants out of sight. Total weight of this installed is 7 oz.\u003c\/td\u003e","brand":"eSHOP.AERO","offers":[{"title":"05-12365","offer_id":47960582619428,"sku":"","price":140.13,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/1428\/0484\/products\/05-12365a.jpg?v=1706180546"},{"product_id":"anti-splat-horizontal-stabilizer-mod-rv-6-7-8","title":"Anti-Splat Horizontal Stabilizer MOD RV-6 7 8","description":"\u003ctd valign=\"top\"\u003e\nThe Anti-SplatAero Horizontal Stabilizer Bracket Mod is engineered to reinforce the horizontal stabilizer spar, addressing known stress points that can lead to structural fatigue. This precision-cut stainless steel bracket enhances the durability of the stabilizer without altering the aircraft's original design or requiring external modifications.\u003c\/td\u003e\u003cp\u003eDimensions: 1X4X4\u003c\/p\u003e","brand":"eSHOP.AERO","offers":[{"title":"05-32434","offer_id":50665474818340,"sku":null,"price":62.37,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/1428\/0484\/files\/05-32434a.png?v=1747863086"},{"product_id":"anti-splat-nose-gear-fairing-protector-rv-6-7-8-9","title":"Anti-Splat Nose Gear Fairing Protector RV-6 7 8 9","description":"\u003ctd valign=\"top\"\u003e\n    The Anti-SplatAero Nose Wheel Fairing Protector is a simple yet highly effective tool designed to prevent damage to your aircrafts nose wheel fairing during lower cowl removal. Especially useful for aircraft with limited clearancesuch as those with three-blade propellersthis tool ensures your maintenance process is clean, safe, and repeatable.\r\n\u003cbr\u003e\u003cbr\u003e\r\nCrafted from a tough, high-strength plastic extrusion, its built to last and designed for quick snap-on use. It replaces makeshift solutions like towels or tape, providing professional-grade protection in seconds.\r\n\u003c\/td\u003e\u003cp\u003eDimensions: 2X4X30\u003c\/p\u003e","brand":"eSHOP.AERO","offers":[{"title":"05-32429","offer_id":50665475670308,"sku":null,"price":59.13,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/1428\/0484\/files\/05-32429.jpg?v=1747863104"},{"product_id":"anti-splat-nose-gear-fairing-protector-rv-10-14","title":"Anti-Splat Nose Gear Fairing Protector RV-10 14","description":"\u003ctd valign=\"top\"\u003e\n    The Anti-SplatAero Nose Wheel Fairing Protector is a simple yet highly effective tool designed to prevent damage to your aircrafts nose wheel fairing during lower cowl removal. Especially useful for aircraft with limited clearancesuch as those with three-blade propellersthis tool ensures your maintenance process is clean, safe, and repeatable.\r\n\u003cbr\u003e\u003cbr\u003e\r\nCrafted from a tough, high-strength plastic extrusion, its built to last and designed for quick snap-on use. It replaces makeshift solutions like towels or tape, providing professional-grade protection in seconds.\r\n\u003c\/td\u003e\u003cp\u003eDimensions: 2X4X36\u003c\/p\u003e","brand":"eSHOP.AERO","offers":[{"title":"05-32430","offer_id":50665475899684,"sku":null,"price":59.13,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/1428\/0484\/files\/05-32429_b35cfde0-d7c5-4243-ba49-f84af72643c1.jpg?v=1747863113"},{"product_id":"anti-splat-vertical-stabilizer-mod-rv-9","title":"Anti-Splat Vertical Stabilizer MOD RV-9","description":"\u003ctd valign=\"top\"\u003e\nThe Anti-SplatAero Vertical Stabilizer Bracket Mod is a precision-manufactured reinforcement designed to strengthen the vertical stabilizer mounting structure on RV-series aircraft. This upgrade addresses a common stress concentration area, improving durability and resistance to cracking under high-load conditions. The bracket is fabricated from aircraft-grade stainless steel and installs without requiring modifications to the aircrafts exterior.\u003c\/td\u003e\u003cp\u003eDimensions: 1X3X7\u003c\/p\u003e","brand":"eSHOP.AERO","offers":[{"title":"05-32432","offer_id":50665481339172,"sku":null,"price":104.6,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/1428\/0484\/files\/05-32433a.png?v=1747863148"},{"product_id":"anti-splat-vertical-stabilizer-mod-rv-6-7-8","title":"Anti-Splat Vertical Stabilizer MOD RV-6 7 8","description":"\u003ctd valign=\"top\"\u003e\nThe Anti-SplatAero Vertical Stabilizer Bracket Mod is a precision-manufactured reinforcement designed to strengthen the vertical stabilizer mounting structure on RV-series aircraft. This upgrade addresses a common stress concentration area, improving durability and resistance to cracking under high-load conditions. The bracket is fabricated from aircraft-grade stainless steel and installs without requiring modifications to the aircrafts exterior.\u003c\/td\u003e\u003cp\u003eDimensions: 1X3X6\u003c\/p\u003e","brand":"eSHOP.AERO","offers":[{"title":"05-32433","offer_id":50665481634084,"sku":null,"price":95.85,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/1428\/0484\/files\/05-32433a_4b9336bb-bf18-4b8c-8037-06f5f9231074.png?v=1747863157"},{"product_id":"almost-a-14-seating-mod-for-rv6-rv6a","title":"Almost A 14 - Seating Mod For RV6 \/ RV6A","description":"\u003ctd valign=\"top\"\u003e\n   This very inexpensive easy to install kit can make your airplane feel like it grew-up providing an all-around roomier cockpit and adding to the enjoyment and comfort of you and your passengers every time you fly your airplane. This will make your RV6 \/ RV6A \/ RV7 \/ RV7A \/ RV9 \/ RV9A slider feel as spacious as a RV-14 and save you 40K or 50K dollars, not to mention thousands of hours of work.\u003cbr\u003e\u003cbr\u003e\r\n\r\nYou can install this kit in an hour or two and get years of use from it without breaking the bank. Every one of these installed so far gets the same reaction, Why didnt I do this a long time ago? Everyone who sits in a plane with this modification wants one for their RV.\u003c\/td\u003e\u003cp\u003eDimensions: 6X6X48\u003c\/p\u003e","brand":"eSHOP.AERO","offers":[{"title":"05-12367","offer_id":51560017396004,"sku":null,"price":343.44,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/1428\/0484\/files\/05-12367.jpg?v=1767922662"},{"product_id":"fuel-injected-easy-exit-bar-for-vans-rv-a-aircraft","title":"Fuel Injected Easy Exit Bar For Vans Rv-A Aircraft","description":"\u003ctd valign=\"top\"\u003e\n\r\nThe Easy Exit Bar a specialty accessory, developed specifically for use in the RV-A models.\r\n\u003cbr\u003e\u003cbr\u003e\r\nThe product is installed by the handles on the roll bar to help leverage. Then, a console between the seats to push on the bar is installed.\r\n\u003cbr\u003e\u003cbr\u003e\r\nAs people get older, getting in and out of the aircraft seems more difficult all the time. When you try to use your feet, you wind up stuffing the carpeting down under the rudder pedals, causing more work and frustration. Not the case with Easy Exit Bar. \r\n\u003cbr\u003e\u003cbr\u003e\r\nWith this current design being the all-around top performer. This one accessory can really save the day, and ease wear and tear on the body when exiting and entering the cockpit. The legs are considerably stronger than youre arms, and are accustomed to lifting ones body weight as well. \u003c\/td\u003e","brand":"eSHOP.AERO","offers":[{"title":"05-22375","offer_id":51987941785892,"sku":null,"price":191.97,"currency_code":"USD","in_stock":false}]},{"product_id":"pkg-6061-mgf-sport-gen3-to-quadlock-adapter-black","title":"PKG 6061 MGF Sport Gen3 To Quadlock Adapter (Black)","description":"\u003ctd valign=\"top\"\u003e\n\r\nPKG 6061 MGF Sport Gen3 To Quadlock Adapter\r\n\u003cbr\u003e\u003cbr\u003e\r\nPKG billet-machined 6061 adapter comes complete with a genuine Quadlock Lever Head to match the MyGoFlight Sport Adapter Gen 3!  Perfect for when you want to transfer your Quadlock phone case straight from the car or motorbike to the aeroplane and back. Available with a blue, red or black lever and also fully compatible with a Quadlock vibration isolator (sold separately).\u003c\/td\u003e\u003cp\u003eDimensions: 3X4X4\u003c\/p\u003e","brand":"eSHOP.AERO","offers":[{"title":"05-33391","offer_id":55896964989220,"sku":null,"price":118.8,"currency_code":"USD","in_stock":false}]},{"product_id":"carbureted-easy-exit-bar-for-vans-rv-a-aircraft","title":"Carbureted Easy Exit Bar For Vans Rv-A Aircraft","description":"\u003ctd valign=\"top\"\u003e\n\r\nThe Easy Exit Bar a specialty accessory, developed specifically for use in the RV-A models.\r\n\u003cbr\u003e\u003cbr\u003e\r\nThe product is installed by the handles on the roll bar to help leverage. Then, a console between the seats to push on the bar is installed.\r\n\u003cbr\u003e\u003cbr\u003e\r\nAs people get older, getting in and out of the aircraft seems more difficult all the time. When you try to use your feet, you wind up stuffing the carpeting down under the rudder pedals, causing more work and frustration. Not the case with Easy Exit Bar. \r\n\u003cbr\u003e\u003cbr\u003e\r\nWith this current design being the all-around top performer. This one accessory can really save the day, and ease wear and tear on the body when exiting and entering the cockpit. The legs are considerably stronger than youre arms, and are accustomed to lifting ones body weight as well. \u003c\/td\u003e","brand":"eSHOP.AERO","offers":[{"title":"05-22376","offer_id":55923181158692,"sku":null,"price":198.45,"currency_code":"USD","in_stock":true}]},{"product_id":"pkg-6061-mirror-bolt-on-ball-end-kit-incl-fairing-black","title":"PKG 6061 Mirror Bolt-On Ball-End Kit Incl Fairing (Black)","description":"\u003ctd valign=\"top\"\u003e\n\r\nPKG 6061 Mirror Bolt-On Ball-End Kit Incl Fairing\r\n\u003cbr\u003e\u003cbr\u003e\r\nAvailable separately, this ball-end can be bolted through the windshield bow with the bolt in either direction - either with the 6-32 bolt threaded into a JD Air handle (nut not required), or all by itself, with the nut encapsulated in the ball-end.  Optional is a color-coded CNC-billet machined bolt-head fairing (in place of a flat washer) to smooth out the intersection, giving a highly professional fit and finish to match the mirrors themselves.\u003c\/td\u003e\u003cp\u003eDimensions: 3X5X7\u003c\/p\u003e","brand":"eSHOP.AERO","offers":[{"title":"05-33398","offer_id":55926338453796,"sku":null,"price":84.24,"currency_code":"USD","in_stock":false}]},{"product_id":"pkg-6061-mirror-bolt-on-ball-end-kit-incl-fairing-silver","title":"PKG 6061 Mirror Bolt-On Ball-End Kit Incl Fairing (Silver)","description":"\u003ctd valign=\"top\"\u003e\n\r\nPKG 6061 Mirror Bolt-On Ball-End Kit Incl Fairing\r\n\u003cbr\u003e\u003cbr\u003e\r\nAvailable separately, this ball-end can be bolted through the windshield bow with the bolt in either direction - either with the 6-32 bolt threaded into a JD Air handle (nut not required), or all by itself, with the nut encapsulated in the ball-end.  Optional is a color-coded CNC-billet machined bolt-head fairing (in place of a flat washer) to smooth out the intersection, giving a highly professional fit and finish to match the mirrors themselves.\u003c\/td\u003e\u003cp\u003eDimensions: 3X5X7\u003c\/p\u003e","brand":"eSHOP.AERO","offers":[{"title":"05-33399","offer_id":55926338879780,"sku":null,"price":84.24,"currency_code":"USD","in_stock":false}]},{"product_id":"pkg-6061-mirror-black-rocket-raider-clip-single-mirror","title":"PKG 6061 Mirror (Black) - Rocket \/ Raider Clip (Single Mirror)","description":"\u003ctd valign=\"top\"\u003e\n\r\nPKG 6061 Mirror - Rocket \/ Raider Clip\r\n\u003cbr\u003e\u003cbr\u003e\r\nOur lightweight 6061 billet-machined mirrors, arms, mounts \u0026amp; cleaning kits are all back in stock - silver, red, blue and black in clip-on, bolt-on or suction mount, your choice!\r\n\u003cbr\u003e\u003cbr\u003e\r\nMirrors are the perfect way to keep an eye on tandem passengers, aircraft taxiing behind you, clearing behind for run up, checking smoke is on\/off\/empty, confirming the trim tab is neutral (we had this exact indication problem ourselves, saved by the mirror instead of having to loosen straps) and seeing your formation buddies.  They've become an indispensable accessory on our aircraft!\r\n\u003cbr\u003e\u003cbr\u003e\r\nAvailable in four colors with the same chemically polished thin stainless steel mirror (bonded in place with genuine 3M 300LSE double-sided film). These feature a 14mm ball-end at the base (to prevent movement under high G), a 12mm ball end on the mirror end and a rotating barrel to optimize alignment.\u003c\/td\u003e\u003cp\u003eDimensions: 3X5X7\u003c\/p\u003e","brand":"eSHOP.AERO","offers":[{"title":"05-33385","offer_id":55926394061092,"sku":null,"price":214.92,"currency_code":"USD","in_stock":false}]},{"product_id":"pkg-6061-mirror-silver-rocket-raider-clip-single-mirror","title":"PKG 6061 Mirror (Silver) - Rocket \/ Raider Clip (Single Mirror)","description":"\u003ctd valign=\"top\"\u003e\n\r\nPKG 6061 Mirror - Rocket \/ Raider Clip\r\n\u003cbr\u003e\u003cbr\u003e\r\nOur lightweight 6061 billet-machined mirrors, arms, mounts \u0026amp; cleaning kits are all back in stock - silver, red, blue and black in clip-on, bolt-on or suction mount, your choice!\r\n\u003cbr\u003e\u003cbr\u003e\r\nMirrors are the perfect way to keep an eye on tandem passengers, aircraft taxiing behind you, clearing behind for run up, checking smoke is on\/off\/empty, confirming the trim tab is neutral (we had this exact indication problem ourselves, saved by the mirror instead of having to loosen straps) and seeing your formation buddies.  They've become an indispensable accessory on our aircraft!\r\n\u003cbr\u003e\u003cbr\u003e\r\nAvailable in four colors with the same chemically polished thin stainless steel mirror (bonded in place with genuine 3M 300LSE double-sided film). These feature a 14mm ball-end at the base (to prevent movement under high G), a 12mm ball end on the mirror end and a rotating barrel to optimize alignment.\u003c\/td\u003e\u003cp\u003eDimensions: 3X5X7\u003c\/p\u003e","brand":"eSHOP.AERO","offers":[{"title":"05-33388","offer_id":55926396813604,"sku":null,"price":214.92,"currency_code":"USD","in_stock":false}]},{"product_id":"pkg-6061-mirror-black-tuto-universal-suction-cup","title":"PKG 6061 Mirror (Black) - Tuto (Universal Suction Cup)","description":"\u003ctd valign=\"top\"\u003e\n\r\nPKG 6061 Mirror - Tuto (Universal Suction Cup)\r\n\u003cbr\u003e\u003cbr\u003e\r\nNow back in stock, our popular 6061 billet-machined mirrors, arms and a suction cup mount actually sticks well to the compound curves of tip-up or tip-over canopies!  Positioned correctly, the mirror obscures virtually the entire mount behind it, the perfect size for rear vision without obstructing too much of the pilot's forward field of view. Our 3D resin printed clip on mirror is also shown to illustrate the size.\r\n\r\nMirrors are the perfect way to keep an eye on tandem passengers, aircraft taxiing behind you, clearing behind for run up, checking smoke is on\/off\/empty, confirming the trim tabs are neutral (we had this exact trim LED position indication problem ourselves, saved by the mirror instead of having to unstrap to check) and seeing your formation buddies.  They've become an indispensable accessory on our aircraft!\r\n\r\nWe tried every name brand suction cup we could get our hands on - Garmin, PanaVise etc and none worked on RV canopies.  In the end it was one of the simplest suction cups that proved reliable.  \r\n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eNote: ALL suction cups have their limitations, especially on compound curves, thus they need to be kept clean and reseated reasonably often to account for temperature variations and slow vacuum leaks to avoid loose items in the cockpit.\u003c\/b\u003e\n\u003c\/td\u003e\u003cp\u003eDimensions: 3X5X7\u003c\/p\u003e","brand":"eSHOP.AERO","offers":[{"title":"05-33386","offer_id":55926401335588,"sku":null,"price":214.92,"currency_code":"USD","in_stock":false}]},{"product_id":"pkg-6061-mirror-silver-tuto-universal-suction-cup","title":"PKG 6061 Mirror (Silver) - Tuto (Universal Suction Cup)","description":"\u003ctd valign=\"top\"\u003e\n\r\nPKG 6061 Mirror - Tuto (Universal Suction Cup)\r\n\u003cbr\u003e\u003cbr\u003e\r\nNow back in stock, our popular 6061 billet-machined mirrors, arms and a suction cup mount actually sticks well to the compound curves of tip-up or tip-over canopies!  Positioned correctly, the mirror obscures virtually the entire mount behind it, the perfect size for rear vision without obstructing too much of the pilot's forward field of view. Our 3D resin printed clip on mirror is also shown to illustrate the size.\r\n\r\nMirrors are the perfect way to keep an eye on tandem passengers, aircraft taxiing behind you, clearing behind for run up, checking smoke is on\/off\/empty, confirming the trim tabs are neutral (we had this exact trim LED position indication problem ourselves, saved by the mirror instead of having to unstrap to check) and seeing your formation buddies.  They've become an indispensable accessory on our aircraft!\r\n\r\nWe tried every name brand suction cup we could get our hands on - Garmin, PanaVise etc and none worked on RV canopies.  In the end it was one of the simplest suction cups that proved reliable.  \r\n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eNote: ALL suction cups have their limitations, especially on compound curves, thus they need to be kept clean and reseated reasonably often to account for temperature variations and slow vacuum leaks to avoid loose items in the cockpit.\u003c\/b\u003e\n\u003c\/td\u003e\u003cp\u003eDimensions: 3X5X7\u003c\/p\u003e","brand":"eSHOP.AERO","offers":[{"title":"05-33389","offer_id":55926401401124,"sku":null,"price":214.92,"currency_code":"USD","in_stock":false}]},{"product_id":"pkg-6061-mirror-black-vans-rv-clip-single-mirror","title":"PKG 6061 Mirror (Black) - Vans Rv Clip (Single Mirror)","description":"\u003ctd valign=\"top\"\u003e\n\r\n6061 Mirror - Vans Rv Clip (Single Mirror)\r\n\u003cbr\u003e\u003cbr\u003e\r\nOur lightweight 6061 billet-machined mirrors, arms, mounts \u0026amp; cleaning kits are all back in stock  - silver, red, blue and black in clip-on, bolt-on or suction mount (separate web page), your choice!\r\n\u003cbr\u003e\u003cbr\u003e\r\nMirrors are the perfect way to keep an eye on tandem passengers, aircraft taxiing behind you, clearing behind for run up, checking smoke is on\/off\/empty, confirming the trim tab is neutral (we had this exact indication problem ourselves, saved by the mirror instead of having to loosen straps) and seeing your formation buddies.  They've become an indispensable accessory on our aircraft!\r\n\u003cbr\u003e\u003cbr\u003e\r\nAvailable in four colors with the same chemically polished thin stainless steel mirror (bonded in place with genuine 3M 300LSE double-sided film). These feature a 14mm ball-end at the base (to prevent movement under high G), a 12mm ball end on the mirror end and a rotating barrel to optimize alignment.\u003c\/td\u003e\u003cp\u003eDimensions: 3X5X7\u003c\/p\u003e","brand":"eSHOP.AERO","offers":[{"title":"05-33387","offer_id":55926405005604,"sku":null,"price":214.92,"currency_code":"USD","in_stock":false}]},{"product_id":"pkg-6061-mirror-silver-vans-rv-clip-single-mirror","title":"PKG 6061 Mirror (Silver) - Vans Rv Clip (Single Mirror)","description":"\u003ctd valign=\"top\"\u003e\n\r\n6061 Mirror - Vans Rv Clip (Single Mirror)\r\n\u003cbr\u003e\u003cbr\u003e\r\nOur lightweight 6061 billet-machined mirrors, arms, mounts \u0026amp; cleaning kits are all back in stock  - silver, red, blue and black in clip-on, bolt-on or suction mount (separate web page), your choice!\r\n\u003cbr\u003e\u003cbr\u003e\r\nMirrors are the perfect way to keep an eye on tandem passengers, aircraft taxiing behind you, clearing behind for run up, checking smoke is on\/off\/empty, confirming the trim tab is neutral (we had this exact indication problem ourselves, saved by the mirror instead of having to loosen straps) and seeing your formation buddies.  They've become an indispensable accessory on our aircraft!\r\n\u003cbr\u003e\u003cbr\u003e\r\nAvailable in four colors with the same chemically polished thin stainless steel mirror (bonded in place with genuine 3M 300LSE double-sided film). These feature a 14mm ball-end at the base (to prevent movement under high G), a 12mm ball end on the mirror end and a rotating barrel to optimize alignment.\u003c\/td\u003e\u003cp\u003eDimensions: 3X5X7\u003c\/p\u003e","brand":"eSHOP.AERO","offers":[{"title":"05-33390","offer_id":55926405234980,"sku":null,"price":214.92,"currency_code":"USD","in_stock":false}]},{"product_id":"pkg-6061-sliding-rv-rocket-canopy-lock-black","title":"PKG 6061 Sliding Rv\/Rocket Canopy Lock (Black)","description":"\u003ctd valign=\"top\"\u003e\n\r\nPKG 6061 Sliding RV\/Rocket Canopy Lock\r\n\u003cbr\u003e\u003cbr\u003e\r\nThese billet-machined canopy lock blocks are super tough, super popular and will also fit painted canopy rails without jamming. They are available to order laser-engraved with your aircraft registration (blank by default, but custom engraving is now FREE from PKG!). Features include a 10mm stainless steel locking bolt with a 4mm pin to correspond with one or more holes drilled in the rail wherever you choose (fully closed or partially open).  Supplied with a quality silicon-covered hardened padlock (three keys) an Acetal drilling guide and new 11\/64\" jobber drill for match drilling one or more holes in the canopy rail.\r\n\u003c\/td\u003e\u003cp\u003eDimensions: 3X5X7\u003c\/p\u003e","brand":"eSHOP.AERO","offers":[{"title":"05-33395","offer_id":55926409265444,"sku":null,"price":174.96,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/1428\/0484\/files\/6061CL1.jpg?v=1785287514"},{"product_id":"pkg-6061-sliding-rv-rocket-canopy-lock-silver","title":"PKG 6061 Sliding Rv\/Rocket Canopy Lock (Silver)","description":"\u003ctd valign=\"top\"\u003e\n\r\nPKG 6061 Sliding RV\/Rocket Canopy Lock\r\n\u003cbr\u003e\u003cbr\u003e\r\nThese billet-machined canopy lock blocks are super tough, super popular and will also fit painted canopy rails without jamming. They are available to order laser-engraved with your aircraft registration (blank by default, but custom engraving is now FREE from PKG!). Features include a 10mm stainless steel locking bolt with a 4mm pin to correspond with one or more holes drilled in the rail wherever you choose (fully closed or partially open).  Supplied with a quality silicon-covered hardened padlock (three keys) an Acetal drilling guide and new 11\/64\" jobber drill for match drilling one or more holes in the canopy rail.\r\n\u003c\/td\u003e\u003cp\u003eDimensions: 3X5X7\u003c\/p\u003e","brand":"eSHOP.AERO","offers":[{"title":"05-33396","offer_id":55926409330980,"sku":null,"price":174.96,"currency_code":"USD","in_stock":false}]},{"product_id":"3dp-sliding-canopy-shock-absorbers-pair-short","title":"3DP Sliding Canopy Shock-Absorbers (Pair) - Short","description":"\u003ctd valign=\"top\"\u003e\n\r\nCutting and fitting an expensive canopy is one of the most time consuming and worrisome tasks in a kit build. If you spent 350 hours on the canopy, then you'll appreciate the skipped heartbeats any time a perspex canopy slips out of hand and rolls to a sudden stop (especially under power), potentially causing cracks. Pliable like silicone, these elastic shock-absorbers are profiled to fit perfectly inside the standard Vans canopy rail extrusion. One of the cheapest and best investments you'll ever make, they are simple to install, simple to replace (when they eventually wear out) and stay put without adhesive or lock wiring.\r\n\u003cbr\u003e\u003cbr\u003e\r\nAvailable in 1+1\/8\" (28mm - softest) and 1.5\" (36mm - firmest) lengths to suit your preference for the level of shock absorption and longevity versus canopy opening space.\u003c\/td\u003e\u003cp\u003eDimensions: 3X4X4\u003c\/p\u003e","brand":"eSHOP.AERO","offers":[{"title":"05-33383 \/ 3DP-014-BLK-28","offer_id":55930346406180,"sku":null,"price":48.6,"currency_code":"USD","in_stock":false}]},{"product_id":"3dp-sliding-canopy-shock-absorbers-pair-long","title":"3DP Sliding Canopy Shock-Absorbers (Pair) - Long","description":"\u003ctd valign=\"top\"\u003e\n\r\nCutting and fitting an expensive canopy is one of the most time consuming and worrisome tasks in a kit build. If you spent 350 hours on the canopy, then you'll appreciate the skipped heartbeats any time a perspex canopy slips out of hand and rolls to a sudden stop (especially under power), potentially causing cracks. Pliable like silicone, these elastic shock-absorbers are profiled to fit perfectly inside the standard Vans canopy rail extrusion. One of the cheapest and best investments you'll ever make, they are simple to install, simple to replace (when they eventually wear out) and stay put without adhesive or lock wiring.\r\n\u003cbr\u003e\u003cbr\u003e\r\nAvailable in 1+1\/8\" (28mm - softest) and 1.5\" (36mm - firmest) lengths to suit your preference for the level of shock absorption and longevity versus canopy opening space.\u003c\/td\u003e\u003cp\u003eDimensions: 3X4X4\u003c\/p\u003e","brand":"eSHOP.AERO","offers":[{"title":"05-33384 \/ 3DP-014-BLK-36","offer_id":55930346635556,"sku":null,"price":48.6,"currency_code":"USD","in_stock":false}]}],"url":"https:\/\/eshop.aero\/collections\/vans-rv-parts.oembed?page=2","provider":"eSHOP.AERO","version":"1.0","type":"link"}