{"product_id":"dynon-rotax-912-premium-egt-emskit-rtx","title":"Dynon Rotax 912 Premium EGT Emskit-Rtx","description":"\u003ctd valign=\"top\"\u003e\nSkyView... the professional glass panel system for experimental and Light Sport aircraft.\r\n\u003cbr\u003e\u003cbr\u003e\r\nFuture Expandability SkyView Overview: \u003cbr\u003e\r\nExperimental and LSA pilots know that they have the most technologically advanced GA aircraft flying. SkyView continues that tradition with the next generation of glass panels, offering fully redundant networks and systems, incredibly bright screens, design flexibility, and future upgradability unsurpassed by anything else flying. SkyView development is proceeding on course. \r\n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eMechanical Specifications:\u003c\/b\u003e \u003cbr\u003e\r\nLinks to mechanical drawings can be found on the left of this page.\r\n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eSystem Components: \u003c\/b\u003e\u003cbr\u003e\r\nThe system architecture is shown below.\r\n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eAdvanced Screens:\u003c\/b\u003e \u003cbr\u003e\r\nVery bright, high-resolution screens driven by advanced graphic processors create highly visible and readable displays. Screen resolutions are 1024x600 for the SV-D1000 10 and 800x480 for the SV-D700 7. Brightness is over 1350 nits for the 10 display and 1200 nits for the 7 display. Displays are fully dimmable for night flight. A wiring harness included with each display makes for easy connections between displays and modules.\r\n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eIntegrated User Interface:\u003c\/b\u003e \u003cbr\u003e\r\nTwo ten-position control knobs (left, right, up, down, diagonal, push, and rotary) offer easy and intuitive control of your SkyView displays. EFIS, EMS, Autopilot, Moving Map, 3-D Terrain\/Synthetic Vision, and menu structures are all available with less than three button presses. Future functionality will include external video display, weather data, traffic, and complete Com radio, Nav radio, and transponder control.\r\n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eSkyView Network:\u003c\/b\u003e \u003cbr\u003e\r\nEvery SkyView system display and module is connected by two independent power and data buses. The failure of any bus connection or module will result in automatic fail-over to a working bus or module. \r\n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eTotal System Battery Backup:\u003c\/b\u003e \u003cbr\u003e\r\nThe system battery will provide over an hour of backup power to displays and modules.\r\n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eFlexible User Interface:\u003c\/b\u003e \u003cbr\u003e\r\nThe default screen setups are logical and functional, so you can start flying with a minimum of setup time. But as you determine your preferences and screen layouts, the displayed data can be configured in ways that work best for you.\r\n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eEngine Module:\u003c\/b\u003e \u003cbr\u003e\r\nThe SV-EMS-220 can be mounted closer to the engine, allowing easier wire routing. Note: the SV-EMS-220 cannot be mounted on the engine side of the firewall.\r\n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eADAHRS Module:\u003c\/b\u003e \u003cbr\u003e\r\nThe SV-ADAHRS-200 is a complete MEMS-based attitude reference and air data computer, integrated with a digital compass. This allows easier mounting and higher accuracy calibration between the system components. One or more SV-ADAHRS-201 Modules can be added to a SkyView System for redundancy.\r\n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eGPS Receiver:\u003c\/b\u003e \u003cbr\u003e\r\nThe SV-GPS-250 connects to the system backup battery for greater reliability. Other NMEA compatible GPS receivers may also be connected to the SkyView system and used in lieu of or redundant to the SV-GPS-250.\r\n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eCompatibility:\u003c\/b\u003e \u003cbr\u003e\r\nYour existing Dynon engine monitor sensors and harness will work with the new SV-EMS-220 Engine Module. Your existing Dynon Servos will work with the SkyView system, including a redundant network connection. Your existing Dynon pitot probes will also work with the SkyView system.\r\n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eUSB Updates:\u003c\/b\u003e \u003cbr\u003e\r\nConvenient program and data updates via USB memory stick. \r\n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eExample Order:\u003c\/b\u003e \u003cbr\u003e\r\nBasic two 10 displays with EMS \u0026amp; ADAHRS   setup\u003cbr\u003e\r\n2 x 10-03932 - \u003cstrong\u003eSkyView\u003c\/strong\u003e 10 Display (includes main   wiring harness)\u003cbr\u003e\r\n1 x 10-03939 - \u003cstrong\u003eSkyView\u003c\/strong\u003e GPS 5Hz Receiver   Module (pins into main harness)\u003cbr\u003e\r\n1 x 10-03940 - \u003cstrong\u003eSkyView\u003c\/strong\u003e Backup Battery\u003cbr\u003e\r\n2 x 10-03942 - Network Cable  Both ends with connectors, 3   long* \u003cbr\u003e\r\n1 x 10-03938 - \u003cstrong\u003eSkyView\u003c\/strong\u003e Engine Monitoring Module \u003cbr\u003e\r\n1   x Engine Harness  See list below \u003cbr\u003e\r\n1 x 10-03936 - \u003cstrong\u003eSkyView\u003c\/strong\u003e ADAHRS  First ADAHRS \u003cbr\u003e\r\n1 x 10-03943 - Network Cable  Both ends with   connectors, 6 long*\u003cbr\u003e\r\n*Choose appropriate network cable distance. With   connectors have 9 pin connectors attached at both ends where with pins only   has one 9 pin connector attached and bare wires at the other end (extra 9 pin   connector included with pins only cable). \u003c\/td\u003e\u003cp\u003eDimensions: 4X4X4\u003c\/p\u003e","brand":"eSHOP.AERO","offers":[{"title":"10-07863 \/ 105490-002","offer_id":54256371728676,"sku":null,"price":1026.0,"currency_code":"USD","in_stock":false}],"url":"https:\/\/eshop.aero\/products\/dynon-rotax-912-premium-egt-emskit-rtx","provider":"eSHOP.AERO","version":"1.0","type":"link"}