{"product_id":"tekton-1-2-inch-drive-90-tooth-flex-head-dual-direction-electronic-torque-wrench-30-300-ft-lb","title":"Tekton - 1\/2 Inch Drive 90-Tooth Flex Head Dual-Direction Electronic Torque Wrench (30 - 300 Ft-Lb)","description":"\u003ctd valign=\"top\"\u003e\n\u003cb\u003eSimple Controls and Straightforward Operation\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003eFast to power-on, select a mode, and set your target.\r\n\u003cbr\u003eLarge, clearly-labeled buttons.\r\n\u003cbr\u003eBacklit LCD screen with bold fonts and clear contrast.\r\n\u003cbr\u003eReal-time sensory feedback from sequential lights, beep patterns, and handle vibration.\r\n\u003cbr\u003eDedicated button for quickly selecting saved presets.\r\n\u003cbr\u003eSimple navigation menus with quick escape button.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eThree Measurement Modes\u003cbr\u003e\n\u003cbr\u003eTorque\u003c\/b\u003e\n\u003cbr\u003eTorque Mode measures the resistance to rotation as you tighten the fastener. Toggle between ft-lb, in-lb, Nm, and kg-m. Use when tightening to a defined torque specification.\u003cbr\u003e\n\u003ccenter\u003e\u003cimg class=\"rounded-corners\" src=\"\/catalog\/graphics\/t\/tekton-torque-mode-screen.jpg\" width=\"55%\"\u003e\u003c\/center\u003e\n\u003cbr\u003e\n\u003cbr\u003e\u003cb\u003eAngle\u003c\/b\u003e\n\u003cbr\u003eAngle Mode measures degrees of rotation. Use when the specification prescribes turning a tightened fastener an additional amount to achieve the final clamping force..\u003cbr\u003e\n\u003ccenter\u003e\u003cimg class=\"rounded-corners\" src=\"\/catalog\/graphics\/t\/tekton-angle-mode-screen.jpg\" width=\"55%\"\u003e\u003c\/center\u003e\n\u003cbr\u003e\n\u003cbr\u003e\u003cb\u003eTorque + Angle\u003c\/b\u003e\n\u003cbr\u003eTorque + Angle Mode combines the settings from the Torque and Angle Mode screens and allows you to do both operations in one step without stopping to change modes.\u003cbr\u003e\n\u003ccenter\u003e\u003cimg class=\"rounded-corners\" src=\"\/catalog\/graphics\/t\/tekton-torque-and-angle-mode-screen.jpg\" width=\"55%\"\u003e\u003c\/center\u003e\n\u003cbr\u003e\n\u003cb\u003eLights, Sounds, and Vibration Feedback\u003c\/b\u003e\n\u003cbr\u003eIn addition to the LCD screen, the torque wrench also provides real-time sensory feedback. Lights change from yellow to green, beeps change to a continuous tone, and the handle vibrates when you hit your target value.\r\n\u003cbr\u003eSound and vibration can be turned off, but lights are always enabled.\r\n\u003cbr\u003e\n\u003ccenter\u003e\n\u003cimg class=\"rounded-corners\" src=\"\/catalog\/graphics\/t\/tekton-lights-sounds-vibrations-inset.jpg\" width=\"55%\"\u003e\u003cimg class=\"rounded-corners\" src=\"\/catalog\/graphics\/t\/tekton-lights-sounds-vibrations.jpg\" width=\"55%\"\u003e\n\u003c\/center\u003e\n\u003cbr\u003e\n\u003cb\u003eAccumulate Angle in Multiple Sweeps\u003c\/b\u003e\u003cbr\u003e\r\nYou don't need to complete an angle in one single sweep. An onboard gyroscope allows the ratcheting action to accumulate the total angle in multiple steps.\u003cbr\u003e\n\u003ccenter\u003e\u003cimg class=\"rounded-corners\" src=\"\/catalog\/graphics\/t\/tekton-accumulate-angle.jpg\" width=\"55%\"\u003e\u003c\/center\u003e\n\u003cbr\u003e\n\u003cb\u003eEasy Conversions for Length Offset\u003c\/b\u003e\n\u003cbr\u003eUsing an off-axis tool such as a crowfoot wrench or torque adapter can change the effective length of the torque wrench. By entering a length offset, the torque wrench will calculate the necessary torque conversion.\r\n\u003cbr\u003eYou can set a positive or negative offset, up to 15 in. or 381 mm. The offset can be used in all three measurement modes.\r\n\u003ccenter\u003e\n\u003cimg class=\"rounded-corners\" src=\"\/catalog\/graphics\/t\/tekton-easy-conversions-inset.jpg\" width=\"55%\"\u003e\u003cimg class=\"rounded-corners\" src=\"\/catalog\/graphics\/t\/tekton-easy-conversions.jpg\" width=\"55%\"\u003e\n\u003c\/center\u003e\n\u003cbr\u003e\n\u003cb\u003e10 Customizable Presets with Repetition Counters\u003c\/b\u003e\u003cbr\u003e\r\nYou can save up to 10 presets and assign them to ordered slots. Each preset stores your measurement mode, target value, and unit. Optionally, you can set a number of repetitions (up to 99) to count each measurement in a series of fasteners.\u003cbr\u003e\n\u003ccenter\u003e\u003cimg class=\"rounded-corners\" src=\"\/catalog\/graphics\/t\/tekton-10-presets.jpg\" width=\"55%\"\u003e\u003c\/center\u003e\n\u003cbr\u003e\n\u003cb\u003eAdditional Features\u003c\/b\u003e\n\u003cbr\u003e\u003cb\u003eSaved History for the Last 50 Measurements\u003c\/b\u003e\n\u003cbr\u003eA history record gets saved each time a peak measurement meets or exceeds your target value. The long-term memory will save the last 50 records, and all records can be cleared anytime.\u003cbr\u003e\n\u003ccenter\u003e\u003cimg class=\"rounded-corners\" src=\"\/catalog\/graphics\/t\/tekton-saved-history.jpg\" width=\"55%\"\u003e\u003c\/center\u003e\n\u003cbr\u003e\n\u003cb\u003eShortcut to Recall the Last Peak Measurement\u003c\/b\u003e\n\u003cbr\u003eYou can press and hold the UNIT button to view the last peak measurement. This is the same measurement as the most recent record in the HISTORY menu, but you don't need to navigate through the menus to find it.\u003cbr\u003e\n\u003ccenter\u003e\u003cimg class=\"rounded-corners\" src=\"\/catalog\/graphics\/t\/tekton-button-shortcut.jpg\" width=\"55%\"\u003e\u003c\/center\u003e\n\u003cbr\u003e\n\u003cb\u003eSet a Future Calibration Reminder\u003c\/b\u003e\n\u003cbr\u003eYou can have the torque wrench remind you to recalibrate by a certain date and\/or cycle count to maintain its original accuracy.\u003cbr\u003e\n\u003ccenter\u003e\u003cimg class=\"rounded-corners\" src=\"\/catalog\/graphics\/t\/tekton-calibration-reminder.jpg\" width=\"55%\"\u003e\u003c\/center\u003e\n\u003cbr\u003e\n\u003cb\u003eOver-Torque Warnings and History\u003c\/b\u003e\n\u003cbr\u003eIf the peak measurement exceeds 110% of the wrench's maximum torque setting, then there will be on-screen warnings, along with sounds and lights to alert you. Every instance of over-torque will be counted and the highest value will be saved for reference.\u003cbr\u003e\n\u003ccenter\u003e\u003cimg class=\"rounded-corners\" src=\"\/catalog\/graphics\/t\/tekton-over-torque.jpg\" width=\"55%\"\u003e\u003c\/center\u003e\n\u003cbr\u003e\n\u003cb\u003ePower-Saving Auto-Shutoff Timer\u003c\/b\u003e\n\u003cbr\u003eAn auto-shutoff feature preserves battery life, and the timer can be set to 2, 5, 10, 30, 60, or 120 minutes.\u003cbr\u003e\n\u003ccenter\u003e\u003cimg class=\"rounded-corners\" src=\"\/catalog\/graphics\/t\/tekton-auto-shutoff.jpg\" width=\"55%\"\u003e\u003c\/center\u003e\n\u003cbr\u003e\n\u003cb\u003eTotal Cycle Counter\u003c\/b\u003e\n\u003cbr\u003eA single cycle is counted whenever a target torque or angle value is reached. The total cycle count is available in the Information sub-menu as a reference.\u003cbr\u003e\n\u003ccenter\u003e\u003cimg class=\"rounded-corners\" src=\"\/catalog\/graphics\/t\/tekton-cycle-count.jpg\" width=\"55%\"\u003e\u003c\/center\u003e\n\u003cbr\u003e\n\u003cb\u003eAccurate Within ±2% for Torque and ±1% for Angle\u003c\/b\u003e\n\u003cbr\u003eThe actual calibration accuracy will be stated on the certificate for your wrench. The maximum allowable deviation from the target will be within ±2% for torque and ±1% for angle, and its often on the lower end of the tolerance.\u003cbr\u003e\n\u003ccenter\u003e\n\u003cimg class=\"rounded-corners\" src=\"\/graphics\/t\/tekton-torque-angle-accuracy-inset-trq82123.jpg\" width=\"55%\"\u003e\u003cimg class=\"rounded-corners\" src=\"\/catalog\/graphics\/t\/tekton-torque-angle-accuracy-trq82123.jpg\" width=\"55%\"\u003e\n\u003c\/center\u003e\n\u003cbr\u003e\n\u003cb\u003eFull-Range Torque Calibration Using the ISO Standard\u003c\/b\u003e\u003cbr\u003e\n\u003ccenter\u003e\n\u003cimg class=\"rounded-corners\" src=\"\/catalog\/graphics\/t\/tekton-full-range-torque-trq82123.jpg\" width=\"55%\"\u003e\u003cimg class=\"rounded-corners\" src=\"\/catalog\/graphics\/t\/tekton-full-range-torque-stats-trq82123.jpg\" width=\"55%\"\u003e\n\u003c\/center\u003e\n\u003cbr\u003eThis torque wrench is calibrated to the ISO standard for torque. The ASME standard is more commonly used, but the ISO requirements are stricter in a few key ways:\r\n\u003cbr\u003eISO requires the lowest marked value on the scale to be tested. ASME starts testing at 20% of the range, which is often higher than the lowest marked value.\r\n\u003cbr\u003eISO requires clockwise and counterclockwise tests to match, whereas ASME allows counterclockwise to be less precise.\r\n\u003cbr\u003eISO requires 5 readings for each set point, whereas ASME only requires 3 readings for each.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eSerialized Certificate of Calibration\u003c\/b\u003e\u003cbr\u003e\n\u003ccenter\u003e\u003cimg class=\"rounded-corners\" src=\"\/catalog\/graphics\/t\/tekton-trq82123-certificate.jpg\" width=\"55%\"\u003e\u003c\/center\u003e\n\u003cbr\u003eA. Serial number matching the engraving on the torque wrench\r\n\u003cbr\u003eB. Torque tested at three set points (30, 180, 300 ft-lb)\r\n\u003cbr\u003eC. Five torque tests for each set point in both directions\r\n\u003cbr\u003eD. Test equipment and conditions\r\n\u003cbr\u003eE. Quick summary of calibration tests\r\n\u003cbr\u003eF. Angle tested in both directions at four set points (45º, 90º, 135º, 180º)\r\n\u003cbr\u003eG. One angle test for each set point in both directions\r\n\u003cbr\u003eH. Standards\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003e90-Tooth Ratchet\u003c\/b\u003e\u003cbr\u003e\r\nThe single half-moon pawl maintains 8 teeth engaged with the gear at all times, so it won't skip under stress.\u003cbr\u003e\n\u003ccenter\u003e\u003cimg class=\"rounded-corners\" src=\"\/catalog\/graphics\/t\/tekton-90-tooth-fixed-ratchet-head.jpg\" width=\"55%\"\u003e\u003c\/center\u003e\n\u003cbr\u003e\n\u003cb\u003e4º Swing Arc Reduces Length of Travel\u003c\/b\u003e\u003cbr\u003e\r\nHaving more teeth in the ratchet (B) results in less travel at the end of the wrench handle (D) between each tooth click.\u003cbr\u003e\n\u003ccenter\u003e\u003cimg class=\"rounded-corners\" src=\"\/catalog\/graphics\/t\/tekton-trq82123-swing-arc.jpg\" width=\"55%\"\u003e\u003c\/center\u003e\n\u003cbr\u003e\n\u003cb\u003e15-Degree Flex Head\u003c\/b\u003e\u003cbr\u003e\r\nThe flex head offers the clearance to work around nearby obstructions. Some accuracy is lost when the handle is not in the straight position, so this feature should only be used when needed.\u003cbr\u003e\n\u003ccenter\u003e\u003cimg class=\"rounded-corners\" src=\"\/catalog\/graphics\/t\/tekton-trq82123-flex-head.jpg\" width=\"55%\"\u003e\u003c\/center\u003e\n\u003cbr\u003e\n\u003cb\u003eCoarse Knurling for a Secure Grip\u003c\/b\u003e\u003cbr\u003e\r\nA deep, sharp-cut diamond pattern on the surface of the handle creates a coarse texture that wont slip in your hand. Grip the handle so your middle finger rests on the groove in the knurling. This is where the pressure should be concentrated for best accuracy.\u003cbr\u003e\n\u003ccenter\u003e\n\u003cimg class=\"rounded-corners\" src=\"\/catalog\/graphics\/t\/tekton-coarse-knurled-grip.jpg\" width=\"55%\"\u003e\u003cimg class=\"rounded-corners\" src=\"\/catalog\/graphics\/t\/tekton-coarse-knurled-grip-inset.jpg\" width=\"55%\"\u003e\n\u003c\/center\u003e\n\u003cbr\u003e\n\u003cb\u003eDesign and Components\u003c\/b\u003e\u003cbr\u003e\n\u003ccenter\u003e\u003cimg class=\"rounded-corners\" src=\"\/catalog\/graphics\/t\/tekton-design-and-components.jpg\" width=\"55%\"\u003e\u003c\/center\u003e\n\u003cbr\u003e\n\u003cb\u003eFull-Featured Case\u003c\/b\u003e\u003cbr\u003e\r\nThe case provides safe transport for the torque wrench and protects it from drops. The case is made of high-density polyethylene (HDPE) and the latches are polypropylene (PP). Each item in the case has its own place and is held securely.\u003cbr\u003e\n\u003ccenter\u003e\u003cimg class=\"rounded-corners\" src=\"\/catalog\/graphics\/t\/tekton-trq82123-full-feature-case.jpg\" width=\"55%\"\u003e\u003c\/center\u003e\n\u003cbr\u003eA. Product manual and certificate of calibration\r\n\u003cbr\u003eB. Removable metal hinge pins\r\n\u003cbr\u003eC. 1\/2 inch to 3\/8 inch drive reducer included\r\n\u003cbr\u003eD. Hard polypropylene latches\r\n\u003cbr\u003eE. Long-term storage slots for 3x AA Batteries\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eRemovable Lid for Shallow Drawers\u003c\/b\u003e\u003cbr\u003e\n\u003ccenter\u003e\u003cimg class=\"rounded-corners\" src=\"\/catalog\/graphics\/t\/tekton-trq82123-removable-lid.jpg\" width=\"55%\"\u003e\u003c\/center\u003e\n\u003cbr\u003e\n\u003cb\u003eTop and Bottom Tracks Allow Stacking\u003c\/b\u003e\u003cbr\u003e\n\u003ccenter\u003e\u003cimg class=\"rounded-corners\" src=\"\/catalog\/graphics\/t\/tekton-case-top-and-bottom-grooves.jpg\" width=\"55%\"\u003e\u003c\/center\u003e\n\u003cbr\u003e\n\u003cb\u003eTextured Surfaces Provide a Firm Grip\u003c\/b\u003e\u003cbr\u003e\n\u003ccenter\u003e\u003cimg class=\"rounded-corners\" src=\"\/catalog\/graphics\/t\/tekton-case-textured-surfaces.jpg\" width=\"55%\"\u003e\u003c\/center\u003e\n\u003cbr\u003e\n\u003c\/td\u003e\u003cp\u003eDimensions: 3X4X28\u003c\/p\u003e","brand":"eSHOP.AERO","offers":[{"title":"12-07078 \/ TRQ82123","offer_id":56255192891684,"sku":null,"price":420.12,"currency_code":"USD","in_stock":false}],"url":"https:\/\/eshop.aero\/products\/tekton-1-2-inch-drive-90-tooth-flex-head-dual-direction-electronic-torque-wrench-30-300-ft-lb","provider":"eSHOP.AERO","version":"1.0","type":"link"}