Airframe Parts
Filters
Newton Sprl Fuel CAP Only Grey
Newton SPRL Non-Locking Fuel Cap Only. Replacement cap for
Steinair AV125B Eyeball Vent
Anodized BLACK. OD is 2" and allows for direct connection of a 2" scat tube. These eyeball vents are FAR SUPERIOR in their construction to those...
View full detailsSherlock Leak Detector Fluid 8OZ Bottle
Manufactured to MIL-PRF-25567E. Type 1 fluids formulated especially for safe usage with oxygen, but are equally effective on hydrogen, nitrogen, h...
View full detailsBrake LH Hose Assembly S1167-4-0101
Parker Stratoflex hose assemblies can be purchased by aircraft make, model, serial number and system, and also for custom applications.
MS29513-012 Aviation Fuel Resistant O-Ring
These MS29513 series O-rings are resistant to fuel and are ideal for applications such as fuel injection connections and primers. A small amount o...
View full detailsNewton Sprl Fuel CAP Only Black
Newton SPRL Non-Locking Fuel Cap Only. Replacement cap for
Tach Cable 38 Right LAY
Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11/16" per 360 ...
View full detailsPiper Spinner Dome
Applicability: Piper PA-18, PA-22, PA-25 (235hp with fixed pitch propellers, serial numbers 2986 to 3691) For dome only, order 05-0773...
View full detailsSCEET-8 Ducting 2 13FT
Sold by the foot. Flexible hose made of two layers of fiber glass and silicone coated with a non-visible steel wire inside the hose wall. Applic...
View full detailsCable Thimbles AN100-3
Made of cadmium plated steel or stainless steel per procurement specification MIL T-5677. Used to form sturdy eye end on control cable. Form cable...
View full detailsBowden Cable Inner Wire
Stainless stainless steel wire .078" diameter. Sold by the foot.
Eaton Mandrel 3/8 S-1051-6
For use with Aeroquip 491 fittings. These tools are recommended to avoid damage to the sealing surface and to properly support the inner tube. Not...
View full detailsMCO413304-3 Steering ROD Boot
Note: Priced and sold per boot. 2 units are required per aircraft.Keep the exhaust and cold out of the cabin with these Kevlar/Fiberglass FAA/PMA ...
View full detailsATS Propeller Shaft OIL Seal Installer 5209
Installs one piece stretch seals without damaging surface on seal or crankshaft. For all flange shafts per Continental Bulletin M-70-2. Also fits ...
View full detailsFuelstat Plus Jet Fuel Testing Kit
There are a number of different types of microorganisms that can grow in certain types of fuel. The biggest problem is presented by a filamentous ...
View full detailsGrommet Edging M22529/2-8R-25
Mil Spec qualified Spring-Fast is the fastest, safest, most reliable way to protect wires, cables, and tubing from abrasion. It locks on with fing...
View full detailsFinger Strainer - Standard
Finger strainers are for fuel tank outlets. Standard size features a brass fitting with 3/8" male pipe thread which fits AN867-3 welding flange,...
View full detailsPiper Reinforcement Patch U60863-003
Dimensions: .25X2X4.25
Turnbuckle Assembly AN140-16L
Complete turnbuckle assemblies consist of a brass barrel and two steel ends, one with right-hand thread and the other with left-hand thread....
View full detailsSafety Cable & Ferrule KIT - 18 Inches - 321 Cres Material- .032 Diameter
Safety Cable is a system used to secure hardware. Unlike traditional lock wire, Safety Cable is a much cleaner and faster way to secure hardwa...
View full detailsCessna Brake Line Fairing Extrusion 5FT
Cessna Brake Line Fairing Extrusion. Reduce drag! Paintable Easily attaches with super glue Sold in 5 ft lengths / by the foot Replac...
View full detailsCAT-5 Ducting 1 1/4 3FT
Sold by the foot. Ducting used to convey air or gaseous fluids at medium temperatures and with high resistance to aging. Vena® MT is manufactur...
View full detailsBrake RH Hose Assembly S1167-4-0080
Parker Stratoflex hose assemblies can be purchased by aircraft make, model, serial number and system, and also for custom applications.
TIN Plated Oval Sleeves 3/32 SL2-3TP MS51844-83
Nicopress swages Material: Tin