Airframe Parts

Double row, ball, light and heavy duty PTFE seals and CRES sealcaps Exposed surfaces except bore, caps and seals are cadmium plated Prelubricated...

KS Series Bearings MS27645Dimensions: .5X2.5X2.5

These terminal assemblies include the AN665 terminals plus the appropriate lock nut, clevis pin, and cotter pin.

(Solid Wire End) Ratchet design provides detented positions under vibration conditions. Simple push-pull operation. Has .0...

Extension exhaust spring - 51381-001 - for Cirrus aircraft.Dimensions: 2X2X6

FAA/PMA approved Timken wheel bearing cup 13830 Series 13800 Single Cup; 2 9/16" OD x 3/8" Wide; 0.030" Maximum Housing Fillet Radius; Standard...

Plunger Primer Mounts in panel thru 3/4' hole. Comes complete with nut and Lockwasher as shown. Two rear ports accept any 1/8' id. fuel line...

NOTE: This is the seal only. Not the entire window. Image is showing the seal around the window. PIPER PA-28/28R/32/32R/34 SERIES WINDOW SEAL, ...

New FUELSTAT® packaging and options FUELSTAT® now has a fresh new look, we have changed the point-of-sale packaging to include full details of ...

The seals are a departure from the weather stripping commonly used on Cessna aircraft. The seal is installed on the fuselage not on the door fra...

Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11/16" per 360 ...

The B series firewall fitting has a 1 inch aluminum ball held in place by 2 stainless steel pressure plates. It has a swivel angle up to ...

The B series firewall fitting has a 1 inch aluminum ball held in place by 2 stainless steel pressure plates. It has a swivel angle up to ...

Sold by the foot. The flexible hose Vena® HT has excellent flexibility and excellent aging resistance. Applications These kind of flexible hos...

Sold by the foot. The flexible hose Vena® HT has excellent flexibility and excellent aging resistance. Applications These kind of flexible hos...

Sold by the foot. Flexible hose made of two layers of fiber glass and silicone coated with a non-visible steel wire inside the hose wall. Applic...

FAA approved improved fuel strainer seals for Piper aircraft. Many of the new seals feature fuel proof fluorocarbon that won't swell or degrade li...

Cessna Gasket FCB-25722 Shelf Life: 180 Months Weight: 0.03 lbs Dimensions: 5.65 (L) x 5.65 (W) x 0.1 (H) in Applicable Aircraft: 190...

Single row, ball, deep groove, medium duty PTFE seals and CRES sealcaps Exposed surfaces except bore, caps, and seals are cadmium plated Prelubri...

The UD-3 flush fuel cap assembly is an unvented cap similar in design to the #5 style cap. The aluminum mounting ring has a 2" dia. opening and an...

The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or "lo...

Complete turnbuckle assemblies consist of a brass barrel and two steel ends, one with right-hand thread and the other with left-hand thread....

Complete turnbuckle assemblies consist of a brass barrel and two steel ends, one with right-hand thread and the other with left-hand thread....

Sold by the foot. Flexible hose made of two layers of fiber glass and silicone coated with a non-visible steel wire inside the hose wall. Applic...