Airframe Parts

Note: Priced and sold individually.A series of anchors specially designed for T type tracks. FAA-PMA approved to fit most G.A. aircraft seat rails...

O-Ring for use with 10920 ACS Primer (See Alternate Items)

Cessna Fuel Filler Neck and Fuel Tank Adapter Gaskets Replace dry, brittle leaky gaskets to prevent water contamination in fuel. Gaskets re...

Surface Check fittings of the MS15001 series have spring-loaded ball check in the tip.

GMM-M & GMB-M Series Male Rod Ends, General Aviation - Precision Body - Carbon steel, protective coated for corrosion resistance. Race - C...

Gas tank cap gasket for Cessna. 2-1/4 Inch outer diameter and 1-3/8 Inch inner diameter.Dimensions: .25X2.25X2.25

Note: Priced and sold individually.A series of anchors specially designed for T type tracks. FAA-PMA approved to fit most G.A. aircraft seat rails...

This universal NAP assembly will eliminate bent or smashed push-pull cable ends and get a strong hold at the same time. The cable end lays in a ma...

Note: Priced and sold individually.A series of anchors specially designed for T type tracks. FAA-PMA approved to fit most G.A. aircraft seat rails...

Built from aircraft grade Aluminum and anodized for corrosion protection this lightweight and compact unit is excellent. The check valve is ideal ...

This control has 10-32 threaded ends with 8 degree swivel & 3-3/8" stroke on both ends. It has Teflon casing liner for use in high-temperatu...

(7/16-20 UNF-2A Threads / Solid Wire End) Provides a 10-lb. locking force for light and medium service applications. Blac...

Dimensions: .67X1X2.375

Specifications: Hose meets or exceeds the requirements of MIL-H-5593. Construction: Tube - Seamless Buna - N. Reinforcement - One braid of high t...

O-rings give effective sealing over wide ranges of pressure, temperature, and movement, with the advantage of sealing pressure in both directions ...

Quick opening brass drain valve for aircraft oil or fuel systems. A slight twist opens valve. No safety wire needed in closed position. FAA approv...

Now FAA TSO-C76 Approved.Brass Fuel Valves, Push to Open, Non-Lock Open, Use Pin Type Cup. Use Curtis Drain Cup - CCA-39680. Curtis Superior Va...

We stock a large inventory of Cessna replacement parts. Some of the most commonly required parts are listed on this page. If you require Cessna pa...

This aluminum handle is specially machined to fit the Allen fuel valves above.Dimensions: .625X.625X2.625

Note: Only part # 05-29500 includes the handleThese premium fuel valves are recommended by Rutan Aircraft as the best fuel valves they have seen. ...

SAF-AIR designed its line of flush mounted fuel drain valves to be an exact replacement for the Auto Valve F391 line of flush fuel...

The F75 is used on wing tip tanks or any application where a 3/4"-16 flush mounted fuel drain valve is needed. This aluminum valve is simple and c...

RB-5022 Aircraft Door Seal sold per foot. The RB-5022 door seal is one of the most secure quarter round seals on the market, and RB-5022 rubber ...

This polyurethane wing fuel mat can be easily cleaned with soap and water. Avoid spraying product with silicone or wd-40 type products because ...