Airframe Parts

GMW-M & GMG-M Series Female Rod Ends, General Aviation - Precision Body - Carbon steel, protective coated for corrosion resistance. Race -...

GMW-M & GMG-M Series Female Rod Ends, General Aviation - Precision Body - Carbon steel, protective coated for corrosion resistance. Race -...

The incredible new GATS Jar allows a pilot to pour the fuel used in the preflight check back into the fuel tank without fear of water contamin...

Replacement fuel sump actuator for the GATS Jar Fuel Tester.Dimensions: .75X.75X4

Twin-tank fuel selector valve. 3 positions: LEFT-OFF-RIGHT. LEFT and RIGHT positions are 90° either side of OFF. Panel mount. This unit if the ha...

Dimensions Specifications Fafnir Bearing MB540DDFS464 MS21428 SAE-AS7949 Extra light duty Single row, ball, torque tube type PTF...

Now FAA TSO-C76 Approved.Brass Fuel Valves, Push to Open, Non-Lock Open, Use Pin Type Cup. Use Curtis Drain Cup - CCA-39680. Curtis Superior Va...

Loop-type cushioned aluminum alloy clamp. Cushion (non-fuel resistant) is bonded to inner surface and edges of clamp. WDG clamps are cushion wedge...

The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or "lo...

These terminal assemblies include the AN665 terminals plus the appropriate lock nut, clevis pin, and cotter pin.

This premium vinyl tubing is recommended for use in extremely cold temperatures where tubing can be prone to becoming stiff and brittle. Manufa...

Use these stainless steel extensions for moderate length adjustments to stock length controls. Stocked with one male and one female threaded end. ...

The T-897 is a Neoprene Rubber Seal that is used in various different applications on the aircraft. It is manufacture from a 60 Durometer Neo...

Parker's fuel line hose includes a thermoplastic barrier that helps protect the atmosphere from harmful hydrocarbons that escape through t...

Stratoflex 311 straight flared fittings for 193 hose.Dimensions: .5X.5X1.062

10781-4 clamp to be used to secure firesleeve material on each end over the basic hose assembly.

10781-4 clamp to be used to secure firesleeve material on each end over the basic hose assembly.

O-rings give effective sealing over wide ranges of pressure, temperature, and movement, with the advantage of sealing pressure in both directions ...

Forged brass 90º throw fuel valves with Fluoroelastomer seals. Available in 1/4", 3/8", or 1/2" female NPT. Light operating force makes them ideal...

Inside and out, aircraft hose MIL-DTL 6000D is designed to handle the effects of oil, alcohol, coolant, and water. The tube is oi...

MDI Flush Drain Valve F-391-72. 7/16" - 20 Thread.Dimensions: 1X.25X3.5

Valve mounts in the sump, the same as original plug, with no projection. Cant be knocked off or opened by particles thrown from propellers. Open...

Outer Member: Carbon Steel, magnetic particle inspected, with protective coating for corrosion resistance. Ball: 52100 Alloy steel, heat treated,...

These rods ends are machined from 1035 or 1042 carbon steel and cadmium plated. Minimum tensile strength 65,000 PSI. They are inter...