Airframe Parts

These terminal assemblies include the AN665 terminals plus the appropriate lock nut, clevis pin, and cotter pin.

Inside and out, aircraft hose MIL-DTL 6000D is designed to handle the effects of oil, alcohol, coolant, and water. The tube is oi...

Used with Aeroquip 601 Hose, Aeroquip 816 (Straight fittings) and 8891 (90º right angle angle hose fittings) consist of a pre-assembled nut/nippl...

SCEET - SCEET type ducting has two plies of silicone rubber-im pregnated fiber glass, similar to SCAT except wire be tween plies. Ideal for...

CEET - CEET type ducting has two plies of neoprene-impregnated fiberglass, similar to CAT except wire between plies. For use in hot or cold air ap...

WIRE GRIP - Is a unique fitting which securely attaches to solid wire end push-pull cables. Uses a "pin vice" gripping ac...

DynaVibe Classic "The Affordable Dynamic Prop Balancer"The DynaVibe Classic is an economical, state-of-the-art dynamic propeller balancer ...

Kit 1: 2.5 oz cartridge (Fill: 2 oz. sealant) Kit 2: 6 oz cartridge (Fill: 3.5 oz. sealant) Kit 3: 6 oz can (Fill: 16 oz. sealant) Kit 4: Quart ...

Kit 1: 2.5 oz cartridge (Fill: 2 oz. sealant) Kit 2: 6 oz cartridge (Fill: 3.5 oz. sealant) Kit 3: 6 oz can (Fill: 16 oz. sealant) Kit 4: Quart ...

The Dynavibe Mounting Hardware consists of the following individual mounts. These individual mounts collectively make up the hardware. There ...

Loop-type cushioned aluminum alloy clamp. Cushion (non-fuel resistant) is bonded to inner surface and edges of clamp. WDG clamps are cushion wedge...

Note: THIS ITEM IS NOT SOLD AS A PAIR. PRICING IS PER UNIT. Cessna Articulating Seats have two crank handles located on the front bottom portion...

Designed to provide a simple method of anchoring a typical wire wound cable. Used in anchor hole of 7/16" diameter.

SAF-AIR push type fuel drain valves are close tolerance valves of simple design. These valves provide the most trouble free operation of any other...

The F75 is used on wing tip tanks or any application where a 3/4"-16 flush mounted fuel drain valve is needed. This aluminum valve is simple and c...

The F75 is used on wing tip tanks or any application where a 3/4"-16 flush mounted fuel drain valve is needed. This aluminum valve is simple and c...

SAF-AIR Products, Inc. has taken its very dependable fuel drain valve and added a new feature it locks in the open position! This valve makes the...

The F75 is used on wing tip tanks or any application where a 3/4"-16 flush mounted fuel drain valve is needed. This aluminum valve is simple and c...

These kits include two bushing sizes for each hinge location. This allows a selective fit and solves the common Cessna fit and interference pro...

These kits include two bushing sizes for each hinge location. This allows a selective fit and solves the common Cessna fit and interference pro...

Pulleys and Pulley Kits for Cessna Aircraft We stock all pulleys required for Cessna single engine aircraft. Our MCS378 series pulleys replace t...

We represent a manufacturer of replacement parts for light aircraft, currently producing about 800 FAA-PMA parts that fit Cessna and Piper aircraf...

These seat rails have only pilot holes drilled in the rail base allowing the installer to exactly match the aircraft floor rivet pattern. The manu...

Direct replacement - no conversion kit required. One required per bucket seat. Helps avoid downtime and expense of repeated overhauls. Replaces ...