Airframe Parts

McFarlane Rod Ends for Cessna AircraftFAA/PMA

Injection molded ABS plastic fairings used to cover hole in airframe where control cables emerge such as the rudder cables at ...

Some of the most commonly required parts are listed on this page. If you require Cessna parts not listed here, please provide us with the Cess...

Rectangular (bar) shape with a threaded hole in the middle. Generally used with screw P/N MS35265-41. Please verify that the parts are correc...

Some of the most commonly required parts are listed on this page. If you require Cessna parts not listed here, please provide us with the Cess...

The T-4096 is a Hollow Quarter round door seal that has four ridges that runs down the sealing surface of it. It is constructed of a medium densit...

Dimensions: .375X.375X.625

Silicone 1/8" X 36" X 40" - red mat. This silicone rubber is excellent for replacement of baffle seals as it exceeds asbestos type seals in...

If military grade is required, please order Dimensions: .29X.38X1.27

M83248 series o-rings are flurocarbon rubber o-rings. Flurocarbon rubber is commonly known as Viton. It is an advanced rubber that h...

Eaton Aeroquip Hose Fittings.

PMA Products Inc. replacement OEM equivalent parts for your aircraft. See "Documents" tab for Application FAA-PMA approved replacemen...

The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or "lo...

KIT INCLUDES AN146-8S -MS21260-S2LH CABLE SWAGE END -AN155-8S TURNBUCKLE BARREL -AN161-8RS TURNBUCKLE FORK ...

Black Firesleeve for Fuel Transducer Cover. 1-1/2 I.D. Priced and sold per foot.

The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or "lo...

The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or "lo...

Univair 65 Piper Push Pull Cable - Less Knob. Non-locking.Dimensions: 2X12X12

U70371-000 Piper Cable Swivel Fitting - Cabin Heat FAA/PMA approved Supercedes s 70371-000, 70371-00

Surface Check fittings of the MS15001 series have spring-loaded ball check in the tip. MS15001-3 Thread: 1/4-28 Tapered Shank Length: 13/64 Thr...

Surface Check fittings of the MS15000 series have spring-loaded ball check in the tip. MS15001-6 Thread: 1/8 NPT Shank Length: 9/32 Thread Le...

Sintered Bronze Oil Impregnated BearingsDimensions: .25X.25X.25

SCEET - SCEET type ducting has two plies of silicone rubber-im pregnated fiber glass, similar to SCAT except wire be tween plies. Ideal for...