Airframe Parts
GAS Spring Assembly FE11
The gas spring is a self-contained counter-balance unit consisting of a piston and piston rod in a hermetically closed cylinder. The ...
View full detailsClamps Plain AN742-8 Steel
Plain loop-type line support clamps, made of aluminum alloy or steel meeting specification QQ-A-362, condition T. Heat-treated to a minimum tensi...
View full detailsH9426 Ball Joint 4 45LB GS SPG
Hex: 1/2 Inch Thread: 5/16-18 Ball: 10 mm
Baffle Seal Retainer Strip
Use as a retainer for riveting baffle seals to baffles. Features: Corrosion resistant Clamps better than washers or light ...
View full detailsMS28775-261 Oring AN6230-39
O-rings give effective sealing over wide ranges of pressure, temperature, and movement, with the advantage of sealing pressure in both directions ...
View full detailsClamps MS21919-DG30
Loop-type cushioned aluminum alloy clamp. Cushion (non-fuel resistant) is bonded to inner surface and edges of clamp. WDG clamps are cushion wedge...
View full detailsSafety Wire .041 SS 1 LB.
Stainless steel safety wire furnished in convenient 1 lb. dispensing container. Available in Type 302/304 stainless steel (soft temper) per MS209...
View full detailsO-Rings AN6227B-39 MS28775-336
O-rings give effective sealing over wide ranges of pressure, temperature, and movement, with the advantage of sealing pressure in both directions ...
View full detailsMS29513-008 Fuel Resist O-Ring
FAA approved improved fuel strainer seals for Piper aircraft. Many of the new seals feature fuel proof fluorocarbon that won't swell or degrade li...
View full detailsAndair Check Valve CK375M-B
Built from aircraft grade Aluminum and anodized for corrosion protection this lightweight and compact unit is excellent. The check valve is ideal ...
View full detailsAN Gasket AN901-8C 12221-3
AN901 tube connection seals are fabricated from type1100 alum., H14 temper. Dimensions: .062X1X1
Cessna Seat Belt Bushing S2237-3
We stock a large inventory of Cessna replacement parts. Some of the most commonly required parts are listed on this page. If you require Cessna pa...
View full detailsSCEET-9 Ducting 2 1/4 3FT
Sold by the foot. Flexible hose made of two layers of fiber glass and silicone coated with a non-visible steel wire inside the hose wall. Applic...
View full detailsSCEET-9 Ducting 2 1/4 8FT
Sold by the foot. Flexible hose made of two layers of fiber glass and silicone coated with a non-visible steel wire inside the hose wall. Applic...
View full detailsSCEET-9 Ducting 2 1/4 5FT
Sold by the foot. Flexible hose made of two layers of fiber glass and silicone coated with a non-visible steel wire inside the hose wall. Applic...
View full detailsClamps Plain AN742-D10 Alum
Plain loop-type line support clamps, made of aluminum alloy or steel meeting specification QQ-A-362, condition T. Heat-treated to a minimum tensi...
View full detailsControl Cable 5/32 1X19 SS
The major difference between aircraft and commercial cable is the lubrication applied to aircraft cable, which provides substantially b...
View full detailsCM-12S Aurora Bearing
CM-S & CB-S Series Male Rod Ends with Studs, General Purpose - Economy Body - Carbon steel, protective coated for corrosion resistance. B...
View full detailsCM-12S Aurora Bearing
CM-S & CB-S Series Male Rod Ends with Studs, General Purpose - Economy Body - Carbon steel, protective coated for corrosion resistance. B...
View full detailsSymmco Bushing SF610-3
SYMMCO SF610-3 Bushing Dimensions: .25X.5X.5
FF520-10 Bushing
BUSHINGS - As used on the Solitaire Sailplane
Silicone Hose 3/4 I.D. Blue
Extruded silicone hose specially recommended for engine cooling and heating system applications.
SCAT-14 Ducting 3 1/2 13FT
Sold by the foot. The flexible hose Vena® HT has excellent flexibility and excellent aging resistance. Applications These kind of flexible hos...
View full detailsSCAT-14 Ducting 3 1/2 3FT
Sold by the foot. The flexible hose Vena® HT has excellent flexibility and excellent aging resistance. Applications These kind of flexible hos...
View full details