Airframe Parts
CCA-4850 Curtis Drain Valve
Quick opening brass drain valve for aircraft oil or fuel systems. A slight twist opens valve. No safety wire needed in closed position. FAA approv...
View full detailsFuel Drain Valve KIT Cessna
These high quality fuel drain valve kits are FAA-PMA approved for a wide range of Cessna and Beechcraft aircraft. These drain valves prevent d...
View full detailsEaton AE102-13 Firesleeve
Aeroquip Firesleeve was specially developed to meet the fire resistance requirements of FAATSO - C53a OR TSO - C75. May be used for all fuel, oil,...
View full detailsCAT-7 Ducting 1 3/4 5FT
Sold by the foot. Ducting used to convey air or gaseous fluids at medium temperatures and with high resistance to aging. Vena® MT is manufactur...
View full detailsDoor Steward 200C10 Right AND Left
The Door Steward is an STC and FAA-PMA approved modification for aircraft doors. The modern gas spring greatly improves and replaces easi...
View full detailsMC1210408-16 Seat Rail
These seat rails have only pilot holes drilled in the rail base allowing the installer to exactly match the aircraft floor rivet pattern. The manu...
View full detailsSphere Steel Gromet .125
The S series firewall fitting has a 1 inch steel ball held in place by 2 stainless steel pressure plates. It has a swivel an...
View full detailsSCAT-11 Ducting 2 3/4 3FT
Sold by the foot. The flexible hose Vena® HT has excellent flexibility and excellent aging resistance. Applications These kind of flexible hos...
View full detailsMcfarlane MCS1104-3 ROD END 3/16 Bore 10-32 Internal Thread Grease
McFarlane Rod Ends for Cessna AircraftFAA/PMA
Breeze Clamp 200-44H
Perforated stainless steel worm-drive clamp. Heavy-duty four-piece Quadra-Lock construction enables far more tightening torque to...
View full detailsEaton AE21943G Nipple
Eaton Aeroquip Hose Fittings.
CEET-2A Ducting 5/8 8FT
Sold by the foot. Ducting used to convey air or gaseous fluids at medium temperatures and with high resistance to aging. Vena® MTD is manufactur...
View full detailsFuel Gasket KIT Piper FSP-KT-1
FAA approved improved fuel strainer seals for Piper aircraft. Many of the new seals feature fuel proof fluorocarbon that won't swell or degrade li...
View full detailsDrain Grommets Flat AN231-2
Manufactured from virgin cellulose acetate butyrate resin.
Pre-Stretched Control Cable 1/16 7X7 Stainless Steel
These control cables are pre-stretched for closer tolerance applications and to reduce stretching following installation. The major difference bet...
View full detailsASA Short Fuel Tester +
Protect yourself from fuel contamination by visually checking the fuel for water and debris. The unique snap on probe fits all quick-drain valv...
View full detailsControl Cable 1/16 7X19 S/S
The major difference between aircraft and commercial cable is the lubrication applied to aircraft cable, which provides substantially b...
View full detailsO-Rings AN6230B-8 MS28775-230
O-rings give effective sealing over wide ranges of pressure, temperature, and movement, with the advantage of sealing pressure in both directions ...
View full detailsAMS3303-32 Silicone Anti-Chafe Seal .032 Black
Anti-Chafe Seal AMS3303-.032. Silicone, Black, 1" wide x 15' long. Silicone Anti-Chafe Material: Mooney and Early Cessna Models Piper: Malibu...
View full detailsSCAT-3 Ducting 3/4
Sold by the foot. The flexible hose Vena® HT has excellent flexibility and excellent aging resistance. Applications These kind of flexible hos...
View full details5/32 Copper Stop Sleeve ST2-5
These copper stop sleeves are used on the ends of bare cables. When properly applied with Locoloc® Hand Swager to bare cable on 3x7, 7x7, 7x19 ...
View full detailsSCAT-20 Ducting 5 3FT
Sold by the foot. The flexible hose Vena® HT has excellent flexibility and excellent aging resistance. Applications These kind of flexible hos...
View full detailsPolyurethane Tube 1/8 ID 0585-033
Flexible polyurethane tubing has greater abrasion and tear resistance than any other type of plastic tubing. Won't age or oxidize. Excellent low t...
View full detailsEaton Hose Fittings 816-8D
Used with Aeroquip 601 Hose, Aeroquip 816 (Straight fittings) and 8891 (90º right angle angle hose fittings) consist of a pre-assembled nut/nippl...
View full details