Airframe Parts

Twin-tank fuel selector valve. 3 positions: LEFT-OFF-RIGHT. LEFT and RIGHT positions are 90° either side of OFF. Panel mount. This unit if the ha...

Dimensions Specifications Fafnir Bearing MB540DDFS464 MS21428 SAE-AS7949 Extra light duty Single row, ball, torque tube type PTF...

Now FAA TSO-C76 Approved.Brass Fuel Valves, Push to Open, Non-Lock Open, Use Pin Type Cup. Use Curtis Drain Cup - CCA-39680. Curtis Superior Va...

Specifications: Valve Material: Brass Thread Size: 3/8-24 UNF Valve Action: Push to Open, Non-Locking Valve Inst Length: .460 Lock Wire D...

Now FAA TSO-C76 Approved.Brass Fuel Valves, Push to Open, Non-Lock Open, Use Pin Type Cup. Use Curtis Drain Cup - CCA-39680. Curtis Superior Va...

Timken Tapered Roller Bearings LM11900LA-902A1.

Loop-type cushioned aluminum alloy clamp. Cushion (non-fuel resistant) is bonded to inner surface and edges of clamp. WDG clamps are cushion wedge...

The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or "lo...

Soft rivets that will not deform baffles. Several sizes for various baffle thicknesses and hole sizes. Dimensions: .25X3X3.5

These terminal assemblies include the AN665 terminals plus the appropriate lock nut, clevis pin, and cotter pin.

This premium vinyl tubing is recommended for use in extremely cold temperatures where tubing can be prone to becoming stiff and brittle. Manufa...

Use these stainless steel extensions for moderate length adjustments to stock length controls. Stocked with one male and one female threaded end. ...

The T-897 is a Neoprene Rubber Seal that is used in various different applications on the aircraft. It is manufacture from a 60 Durometer Neo...

Parker's fuel line hose includes a thermoplastic barrier that helps protect the atmosphere from harmful hydrocarbons that escape through t...

10781-4 clamp to be used to secure firesleeve material on each end over the basic hose assembly.

Stratoflex 311 straight flared fittings for 193 hose.Dimensions: .5X.5X1.062

10781-4 clamp to be used to secure firesleeve material on each end over the basic hose assembly.

10781-4 clamp to be used to secure firesleeve material on each end over the basic hose assembly.

SAF-AIR Products, Inc. has taken its very dependable fuel drain valve and added a new feature it locks in the open position! This valve makes the...

An O-Ring is simply a circular sealing ring with a round cross section, i.e. a torus, usually made from an elastomeric material. The O-Ring's simp...

O-rings give effective sealing over wide ranges of pressure, temperature, and movement, with the advantage of sealing pressure in both directions ...

Forged brass 90º throw fuel valves with Fluoroelastomer seals. Available in 1/4", 3/8", or 1/2" female NPT. Light operating force makes them ideal...

Inside and out, aircraft hose MIL-DTL 6000D is designed to handle the effects of oil, alcohol, coolant, and water. The tube is oi...

These Cessna Steering Rods are better than the originals. Replace old, weak steering rods with these stainless steel, FAA-PMA approved steering ro...