Airframe Parts

MDI Flush Drain Valve F-391-72. 7/16" - 20 Thread.Dimensions: 1X.25X3.5

Valve mounts in the sump, the same as original plug, with no projection. Cant be knocked off or opened by particles thrown from propellers. Open...

Outer Member: Carbon Steel, magnetic particle inspected, with protective coating for corrosion resistance. Ball: 52100 Alloy steel, heat treated,...

These rods ends are machined from 1035 or 1042 carbon steel and cadmium plated. Minimum tensile strength 65,000 PSI. They are inter...

These Zinc plated steel terminals are manufactured to AN specifications, with either right-hand or left-hand threads. Example: P/N AN665-10L has a...

Stainless Cowling Fastener Replacement Kits for Cessna, both slotted and phillips. Recepticles not included with Direct Fastener Replacements

Stainless Cowling Fastener Replacement Kits for Cessna, both slotted and phillips. Recepticles not included with Direct Fastener Replacements

Dimensions: .25X.25X.5

Perforated stainless steel worm-drive clamp. Heavy-duty four-piece Quadra-Lock construction enables far more tightening torque to...

The A-790 vernier control has a .078" dia. stainless steel wire core. Both the wire and Teflon lined flexible casing may be shortened as required....

The A-790 vernier control has a .078" dia. stainless steel wire core. Both the wire and Teflon lined flexible casing may be shortened as required....

Complete turnbuckle assemblies consist of a brass barrel and two steel ends, one with right-hand thread and the other with left-hand thread....

Complete turnbuckle assemblies consist of a brass barrel and two steel ends, one with right-hand thread and the other with left-hand thread....

This premium vinyl tubing is recommended for use in extremely cold temperatures where tubing can be prone to becoming stiff and brittle. Manufa...

Complete turnbuckle assemblies consist of a brass barrel and two steel ends, one with right-hand thread and the other with left-hand thread....

The MS21259 series stud end fittings are manufactured from stainless steel to the strict standards of MS21259. They are certified to the MS21259 s...

Stinson Parts Dimensions: .5X1.5X2

Stinson Parts

The SA5817-4C is used with a 3/4"-16 bulkhead fitting to mount the valve flush with the outside skin of the plane. A hose is attached to the valve...

Dimensions: .36X2.75X2.75

O-rings give effective sealing over wide ranges of pressure, temperature, and movement, with the advantage of sealing pressure in both directions ...

O-rings give effective sealing over wide ranges of pressure, temperature, and movement, with the advantage of sealing pressure in both directions ...

Parker Stratoflex hose assemblies can be purchased by aircraft make, model, serial number and system, and also for custom applications.