Airframe Parts

SCAT - SCAT type ducting has the same type construction as CAT except with red silicone rubber impregnation. For use in conducting extremely cold ...

Clip-Locking Turnbuckles utilize 2 locking clips instead of lock-wire for safety. The turnbuckle barrel and terminals are slotted lengthwise to...

10781-4 clamp to be used to secure firesleeve material on each end over the basic hose assembly.

Manufactured to MIL-PRF-25567E. Type 1 fluids formulated especially for safe usage with oxygen, but are equally effective on hydrogen, nitrogen, h...

N210A & AN210B (MS24566) Anti-Friction Bearing Control Pulley with phenolic body and ball bearing with seal. The AN210A pulleys are dimensiona...

Loop-type cushioned aluminum alloy clamp. Cushion (non-fuel resistant) is bonded to inner surface and edges of clamp. WDG clamps are cushion wedge...

FAA-approved revolutionary seal design! Intense development and testing went into creating this revolutionary Entry Door Seal for Cessna. Cust...

Neoprene engine baffle is a polyester fiber reinforcement neoprene material. The neoprene material offers a temperature range of -20°F to 212°F. T...

T-8071-36 Black Silicone Engine Baffle 1/8"x36"x40" This is your best option when it comes to replacing those worn out Silicone Engine Baffles t...

5/16" Ice Protection 15164-092 Dimensions: 2X2X6

The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or "lo...

The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or "lo...

16503 1/16 7x7 Uncoated SS Cable. 1/16 Uncoated 7x7 500 Lbs. 0.75 Lbs per 100. Sold by the foot.

Will not deteriorate in petroleum products. Recommended for oil and solvent service. Wt. 6 oz. per sq. ft. 1 Size: 1/16" thic...

These McCauley De-Ice Brush Clusters from Rapco are FAA-PMA approved Brush Clusters for McCauley Brush Blocks Brush cluster replacements for...

Flop tubes for inverted flight are made from Aeroquip 701-6 flexible hose. End fitting swaged onto hose has a 1/4" male pipe thread attached to t...

Quick opening brass drain valve for aircraft oil or fuel systems. A slight twist opens valve. No safety wire needed in closed position. FAA approv...

Specifications: Valve Material: Brass Thread Size: 1/8 NPT Valve Action: Push to Open, Non-Locking Valve Inst Length: .520 Lock Wire Dril...

Curtis Superior Valves are designed for installation in a standard NPT port for NPT threaded valves or an AND-10050 stlye port for UNF threade...

Crew-Tool Sealant Nozzles.Dimensions: 2X2X4

Crew-Tool Sealant Nozzles.Dimensions: 2X2X4

The major difference between aircraft and commercial cable is the lubrication applied to aircraft cable, which provides substantially b...

Band Material: Corrosion Resistant Steel Cushion Material: Silicone - For elevated temperature usage in phosphate ester based fluid and other synt...

Loop-type cushioned aluminum alloy clamp. Cushion (non-fuel resistant) is bonded to inner surface and edges of clamp. WDG clamps are cushion wedge...