Airframe Parts
Filters
Safety Wire .032 Brass 1 Lb.
Annealed brass safety wire furnished in convenient 1 lb. dispensing container. Available in soft annealed brass per specification QQ-W-321, Type A...
View full detailsPR-1425 B Windshield AND Canopy Sealant 6OZ 2 Hour
PR-1425 Class B is an aircraft windshield and canopy sealant. It has a service temperature range from -65°F to (-52°C) to 250°F (121°C), with int...
View full detailsPhenolic Pulley MS20219-1
N210A & AN210B (MS24566) Anti-Friction Bearing Control Pulley with phenolic body and ball bearing with seal. The AN210A pulleys are dimensiona...
View full detailsNewton Sprl Cap O-Ring Kit
The O ring seals employed as the sealing method on the Aero Tank filler caps are to BS 1806 or BS4518 depending on the size. The materia...
View full detailsMcfarlane MC62701-047 Cable Stabilator Trim AFT
These cables are applicable to 170A and 172RG models. You may purchase cables separately or in complete cable kits. The new cables are included wh...
View full detailsMCC299506-0101 Prop Control
Solid Metal Construction Pilot Friendly Knobs Lifetime Lubrication Superior Low Friction Conduit Custom Controls Available Dimensions: 3X17X17
Mcfarlane S2814-2EH Cable Assembly Door Pull
FAA-PMA direct replacement door cables for Cessna 208 aircraft. These quality manufactured cables by Seginus, Inc. are for cargo door, passenger d...
View full detailsMC0511000-15 Seat Rail
These seat rails have only pilot holes drilled in the rail base allowing the installer to exactly match the aircraft floor rivet pattern. The manu...
View full detailsMC0712500-18 Trim Actuator Boot
McFarlane trim actuator boot MC0712500-18 McFarlane recommends replacing the boot and clamp at the same time. High quality, flexible, durabl...
View full detailsLCOM-3 Aurora Bearing
LCOM Series Large Size Spherical Bearings, (Ptfe Liners Available) Outer Member - Carbon steel, protective coated for corrosion resistance. Rac...
View full detailsKIT Steering ROD Boot FOR 172 175 182 Cessna Series (Pair)
Note: Each kit contains two boots and two doublers The steering rod boots on the Cessna aircraft have a big job to do. They must keep out exhaus...
View full detailsGrease Fitting MS15001-4 Commercial
Surface Check fittings of the MS15000 series have spring-loaded ball check in the tip. MS15001-4 Thread: 1/4-28 Tapered Shank Length: 3/16 Th...
View full detailsGasket Upper Seal MC751-882
FAA approved improved fuel strainer seals for Piper aircraft. Many of the new seals feature fuel proof fluorocarbon that won't swell or degrade li...
View full detailsFuel Gasket KIT Piper FSP-KT-3
FAA approved improved fuel strainer seals for Piper aircraft. Many of the new seals feature fuel proof fluorocarbon that won't swell or degrade li...
View full detailsFuel Bowl KIT FS-KT-2
Kit contains: 1 MC0756009-8 Gasket 1 MC0756008-1 Fuel bowl 1 MCM83248/1-010 O-ring 1 MCM83248/1-111 O-ring 1 MCM83248/1-138 O-ring 1 MC0...
View full detailsFLP-KT-1 Flap Roller KIT 1
Flap attachment kits are available for Cessna aircraft from Cessna 150 thru T210. Each kit contains FAA-PMA replacement rollers, bushings, and spa...
View full detailsFafnir Bearing MS27641-8
Single row, ball, deep groove, medium duty PTFE seals and CRES sealcaps Exposed surfaces except bore, caps, and seals are cadmium plated Prelubri...
View full detailsCowl Saver CS085X18X36G
Cowl Saver Baffle Seal Material has 10 times Less Friction! One side is silicone and the other is the revolutionary friction fr...
View full detailsCone/Seal LA-902A1 Gerdes Bear
Timken Tapered Roller Bearings LM11900LA-902A1.
Clamps Plain AN742-D4 Alum
Clamps MS21919-DG7
Loop-type cushioned aluminum alloy clamp. Cushion (non-fuel resistant) is bonded to inner surface and edges of clamp. WDG clamps are cushion wedge...
View full detailsClamp Style Control Mount 10464
SLOTTED BRACKET CONTROL MOUNT (PN 10465) Notch of end fitting locks into slot of bracket to secure control. Steel Construction. Inclu...
View full detailsClamps MS21919-DG26
Loop-type cushioned aluminum alloy clamp. Cushion (non-fuel resistant) is bonded to inner surface and edges of clamp. WDG clamps are cushion wedge...
View full detailsClamp MS21919-WdG28
Loop-type cushioned aluminum alloy clamp. Cushion (non-fuel resistant) is bonded to inner surface and edges of clamp. WDG clamps are cushion wedge...
View full details