Airframe Parts

The original perforated stainless steel worm-gear clamp. Heavy duty four-piece Quadra-Lock construction enables far more tightening torque to be d...

This latest modification of the ACS Flush Fuel Cap (unvented) utilizes a Viton O-Ring as the sealing element between the cap and mounting ring. Th...

Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened a...

FAA/PMA approved Timken wheel bearing cup 13836 Series 13800 Single Cup; 2 9/16" OD x 3/8" Wide; 0.030" Maximum Housing Fillet Radius; Standard...

This is a really good way to demonstrate the difference that VGs make to the airflow. Notice that outer portion of the wing, behind the ...

Specifications: Hose meets or exceeds the requirements of MIL-H-5593. Construction: Tube - Seamless Buna - N. Reinforcement - One braid of high t...

O-rings give effective sealing over wide ranges of pressure, temperature, and movement, with the advantage of sealing pressure in both directions ...

O-rings give effective sealing over wide ranges of pressure, temperature, and movement, with the advantage of sealing pressure in both directions ...

O-rings give effective sealing over wide ranges of pressure, temperature, and movement, with the advantage of sealing pressure in both directions ...

We represent a manufacturer of replacement parts for light aircraft, currently producing about 800 FAA-PMA parts that fit Cessna and Piper aircraf...

Versatile bracket of .016 stainless steel accommodates gascolators with either metal or glass bowl. When mounted as illu...

1-1/4-Inch x 1/16-Inch This is an adhesive backed, closed cell foam tape which is available by the foot. This tape can be wrapped around the edge...

1-1/4-Inch x 1/16-Inch This is an adhesive backed, closed cell foam tape which is available by the foot. This tape can be wrapped around the edge...

Loop-type cushioned aluminum alloy clamp. Cushion (non-fuel resistant) is bonded to inner surface and edges of clamp. WDG clamps are cushion wedge...

Loop-type cushioned aluminum alloy clamp. Cushion (non-fuel resistant) is bonded to inner surface and edges of clamp. WDG clamps are cushion wedge...

A Safe "No-Slip-Grip" for your thru-bulkhead cables. This unit prevents your throttle mixture, choke or any push-pull cable from slipping at the ...

Designed to be more user friendly than standard control wheels. Mounting position can be raised or lowered one inch by rotating...

8127 Two Handle Adapter Kit. Includes two brackets, two bulkheads, and attaching hardware.

FAA/PMA approved Timken wheel bearing cup 13830 Series 13800 Single Cup; 2 9/16" OD x 3/8" Wide; 0.030" Maximum Housing Fillet Radius; Standard...

Specifications: Hose meets or exceeds the requirements of MIL-H-5593. Construction: Tube - Seamless Buna - N. Reinforcement - One braid of high t...

The B series firewall fitting has a 1 inch aluminum ball held in place by 2 stainless steel pressure plates. It has a swivel angle up to ...

Fuel Tank Hold Down Strap.

Some of the most commonly required parts are listed on this page. If you require Cessna parts not listed here, please provide us with the Cess...

Some of the most commonly required parts are listed on this page. If you require Cessna parts not listed here, please provide us with the Cess...