Airframe Parts

For checking seat rail wear limits as per FAA Airworthiness Directive 2011-10-09, Effective 06/17/2011 The Seat Track Wear Gauge is designed to c...

1. Grommet, Tail 2. Grommet 3. Grommet 4. Grommet 5. Grommet, Inspection Plate 6. Grommet, Strut 7. Grommet, Tail (used on PA-25 and later PA-18s}...

Light weight aluminum adapters by Phenix Industries are designed for leak-proof sealing with any manufacturers hose ends. Made in USA. Dimensions...

Cessna models 152, A152, F152, FA152 and 172RG aircraft may have various flap track rib assemblies installed. If flap track rib assembly 0523231...

Note: Priced and sold per boot. 2 units are required per aircraft.Keep the exhaust and cold out of the cabin with these Kevlar/Fiberglass FAA/PMA ...

These seat rails have only pilot holes drilled in the rail base allowing the installer to exactly match the aircraft floor rivet pattern. The manu...

Mil Spec qualified Spring-Fast is the fastest, safest, most reliable way to protect wires, cables, and tubing from abrasion. It locks on with fing...

Sold in a 10 foot roll. Spring-Fast® SL Series plastic trim has similar attributes of the "AP" and "BAP" Series grommet edging.

Sold by the Ft. Spring-Fast® SL Series plastic trim has similar attributes of the "AP" and "BAP" Series grommet edging.

Dow Corning 732 Multi-Purpose Sealant is a one-part silicone rubber; adheres to a variety of surfaces, has good resistance to weathering, mois...

Cessna Drain Valve - S2106-4. Cessna Replacement Part.

OD ID LENGTH CABLE DIA. MATERIAL PART NO. 1/4 8-32 .240" 3/32 Max. Steel 2361 Dimensions:...

Aeroquip 491 hose fittings consist of an AN818 style nut, an externally threaded 37 nipple and an internally threaded hose socket. Fittings of siz...

SCAT - SCAT type ducting has the same type construction as CAT except with red silicone rubber impregnation. For use in conducting extremely cold ...

CAT - CAT type flexible hot or cold air ducting is extremely lightweight and highly flexible. Short lengths can be joined together to form a conti...

Oetiker stepless screw clamps feature a unique tongue-in-groove design to provide a perfect 360 degree seal. The narrow band width of 9mm is desig...

Oetikers core skills are reflected in three tried-and-tested product groups. A wide range of clamps and rings for connections and mountings of a...

Measures .064 (1.5mm) diameter 1 x 19 construction. #7417 solder swage factory installed on one end only. Ideal for Bing or Mikuni Carbs. #741...

Used with Aeroquip 306 Hose, Aeroquip 471 hose fittings consist of an AN818 nut, an externally threaded 37 nipple and an internally threaded hose ...

1-1/2 inch wide x 1/16 inch thick Sold by the foot.

The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or "lo...

Clip-Locking Turnbuckles utilize 2 locking clips instead of lock-wire for safety. The turnbuckle barrel and terminals are slotted lengthwise to...

The fork end fittings are manufactured from stainless steel. Also known as strap eyes or strap eye end fittings.Dimensions: .375X.5X1.75

Aircraft Type: Cessna 182 Fits Models:182 through D Part: #182 Note: STC is pending for use on US type certificated aircraft. This part can b...