Airframe Parts

Crew-Tool Sealant Nozzles.Dimensions: 2X2X5

Designed for tank installation. No built in filter. 90° rotation for ON-OFF. Has standard 1/4" barb outlet tube.Dimensions: 1X1.5X2.5

Nylon Brake Tubing 3/16" O.D, 1/8" IDSold by the Ft.

O-rings give effective sealing over wide ranges of pressure, temperature, and movement, with the advantage of sealing pressure in both directions ...

O-rings give effective sealing over wide ranges of pressure, temperature, and movement, with the advantage of sealing pressure in both directions ...

O-Ring - High Temp, Fluid Resistant, Very Low Compression Set, Fluorocarbon Rubber Ring

O-rings give effective sealing over wide ranges of pressure, temperature, and movement, with the advantage of sealing pressure in both directions ...

O-rings give effective sealing over wide ranges of pressure, temperature, and movement, with the advantage of sealing pressure in both directions ...

Replacement Elevator/Rudder Hinge Bushings.

Oetiker stepless screw clamps feature a unique tongue-in-groove design to provide a perfect 360 degree seal. The narrow band width of 9mm is desig...

This silicone rubber is excellent for replacement of baffle seals as it exceeds asbestos type seals in durability and flexibility over its entire ...

Simplify installation of cabin, carb heat, cabin vent lines. Aluminum flange may be welded or riveted in place. Slip ducting over outlet and secur...

Harness with two chrome-plated steel adapters on front webbing extensions which mate with metal-to-metal buckle for safety belt/harness set. Harne...

Annealed brass safety wire furnished in convenient 1 lb. dispensing container. Available in soft annealed brass per specification QQ-W-321, Type A...

Crew-Tool Sealant Nozzles.Dimensions: 2X2X4

FAA/PMA approved Timken wheel bearing cup 13836 Series 13800 Single Cup; 2 9/16" OD x 3/8" Wide; 0.030" Maximum Housing Fillet Radius; Standard...

Wheel Bearing Cups and Cones FAA-PMA approved Timken wheel bearings for Goodyear, Cleveland, and McCauley wheels Class 2 aviation grade FAA-...

Plain loop-type line support clamps, made of aluminum alloy or steel meeting specification QQ-A-362, condition T. Heat-treated to a minimum tensi...

These bearings are spherical on the outside and are contained in a flanged, stamped metal cage, so they provide sliding, rotating, and p...

These bearings are spherical on the outside and are contained in a flanged, stamped metal cage, so they provide sliding, rotating, and p...

Eaton Aeroquip Hose Fittings.Dimensions: .75X1X2.75