Airframe Parts

These MS29513 series O-rings are resistant to fuel and are ideal for applications such as fuel injection connections and primers. A small amount o...

Eaton Aeroquip Packings.Dimensions: 1X.2X1

This silicone rubber is excellent for replacement of baffle seals as it exceeds asbestos type seals in durability and flexibility over its entire ...

Sold by the foot. Ducting used to convey air or gaseous fluids at medium temperatures and with high resistance to aging. Vena® MTD is manufactur...

Sold by the foot. The flexible hose Vena® HT has excellent flexibility and excellent aging resistance. Applications These kind of flexible hos...

Super Soundproofing Foam Tape

O-rings give effective sealing over wide ranges of pressure, temperature, and movement, with the advantage of sealing pressure in both directions ...

Timken wheel bearing cup LM29710 Series LM29700 Single Cup; 2 9/16" OD x 0.5500" Wide; 0.050" Maximum Housing Fillet Radius; Standard ToleranceD...

Oetiker stepless screw clamps feature a unique tongue-in-groove design to provide a perfect 360 degree seal. The narrow band width of 9mm is desig...

MIXTURE CONTROLS Model Serial # P/N Our P/N PA-18,PA-18S,PA-18"105" All 600-72 05-01254 PA18S"105",PA-18A,PA-18"125" All 600-...

"V" Strip Canopy Channel 20 Ft. required for Long-EZ. Flat Side: 0.355" Curved Side: 0.388" Opening: 0.295" Sold by the foot.

Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened a...

Sold by the foot. Flexible hose made of two layers of fiber glass and silicone coated with a non-visible steel wire inside the hose wall. Applic...

Loop-type cushioned aluminum alloy clamp. Cushion (non-fuel resistant) is bonded to inner surface and edges of clamp. WDG clamps are cushion wedge...

These template blanks are used to transfer holes from the old seat rail to the new seat rail when replacing Cessna seat rails. These templates are...

NEWTON EQUIPMENT REPLACEMENT FLANGE GASKET - 8 HOLE

Cessna Brake Line Fairing Extrusion. Reduce drag! Paintable Easily attaches with super glue Sold in 5 ft lengths / by the foot Replac...

Sold by the foot. The flexible hose Vena® HT has excellent flexibility and excellent aging resistance. Applications These kind of flexible hos...

Simplify installation of cabin, carb heat, cabin vent lines. Aluminum flange may be welded or riveted in place. Slip ducting over outlet and secur...

Sold by the foot. Ducting used to convey air or gaseous fluids at medium temperatures and with high resistance to aging. Vena® MT is manufactur...

10781-4 clamp to be used to secure firesleeve material on each end over the basic hose assembly.

Door gap seal for J-3 and PA-18.Dimensions: 1X2.38X6

Quick opening brass drain valve for aircraft oil or fuel systems. A slight twist opens valve. No safety wire needed in closed position. FAA approv...