Airframe Parts

Eaton Aeroquip Hose Fittings.

1/2" diameter vinyl covered material that provides additional sealing and ornamental edging for the door opening. The win...

Dimensions: .1875X.1875X.375

Dimensions: .75X1.225X2

**Note: All sizes in chart are in inches** Flexible grommets, made of black synthetic rubber to specification MIL-G-3036. Resistant to hot o...

A low-pressure hose for instrument air & vacuum lines. Consists of an inner tube of seamless synthetic rubber, reinforce...

Includes mounting flange and backing plate. Mount your gascolator solidly on the firewall with this special bulkhead fitting. Simply drill a 5/8" ...

The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or...

The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or "lo...

The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or "lo...

Gascolator replacement screen, 74 microns for acs gascolator (10543-74)The OD is 1.75" and the ID is .50". Both screens have the same dims. Made...

Anodized CLEAR. OD is 2" and allows for direct connection of a 2" scat tube. These eyeball vents are FAR SUPERIOR in their construction to tho...

PMA Products Inc. replacement OEM equivalent parts for your aircraft. See "Documents" tab for Application FAA-PMA approved replacemen...

PMA Products Inc. replacement OEM equivalent parts for your aircraft. See "Documents" tab for Application FAA-PMA approved replacemen...

Perforated Stainless Steel worm-drive clamp. Heavy-duty four-piece Quadra-Lock construction enables far more tightening torque to be deliv...

O-rings give effective sealing over wide ranges of pressure, temperature, and movement, with the advantage of sealing pressure in both d...

Some of the most commonly required parts are listed on this page. If you require Cessna parts not listed here, please provide us with the Cess...

Crew-Tool Sealant Nozzles.Dimensions: 2X2X4

Plain loop-type line support clamps, made of aluminum alloy or steel meeting specification QQ-A-362, condition T. Heat-treated to a minimum tensi...

Loop-type cushioned aluminum alloy clamp. Cushion (non-fuel resistant) is bonded to inner surface and edges of clamp. WDG clamps are cushion wedge...

Specifications: Hose meets or exceeds the requirements of MIL-H-5593. Construction: Tube - Seamless Buna - N. Reinforcement - One braid of high t...

O-rings give effective sealing over wide ranges of pressure, temperature, and movement, with the advantage of sealing pressure in both directions ...

Two piece firewall shield, 1/2-Inch hole and 3/4-Inch dimple for grommet. Two piece shields for use over cables or wires with large end-fittings...

High Pressure Strut Valve (Small Diameter Thread Adapter) (Fits Cessna Nose Gear, Some Models)