Products

FL Empty-Full 0-5 vdc, 2" round (2C7V). Use with 0-5 volt output capacitance type sender. Made in USADimensions: 2.75X2.75X2.75

FL Empty-Full 0-5 vdc, 2" round, full sweep meter, 12vdc (2CHT7V-5). Use with Westach's 0-5 volt output capacitance type sender. Made in USA

Two instruments in one size case - perfect for the home builder. Ranges: 100-700° F. Senders sold separately Made in USADimensions: 2.7...

3-1/8" Square Exhaust Gas Temperature with a range of 100 - 1900F Made in USA

Dual EGT 700-1700f / RPM 1000-8000, 3 1/8" square, alt 2 or 6P. #3DA7-8A-2/6 Two instruments in one size case - perfect for the home builder. A...

3-1/8" Square Exhaust Gas Temperature with a range of 100 - 1900F Made in USA

3-1/8" TWIN CHT Weight 10 Oz. and 100-800 F. All Pressure Instruments come complete with Pressure Senders only. Made in USADimensions: 3X3.7...

Dual EGT 3-1/8" Size, Wt. 10 Oz.700-1700°F Made in USA

3-1/8" Square Exhaust Gas Temperature with a range of 100 - 1900F Made in USADimensions: 3.13X3.75X3.75

3-1/8" TWIN CHT Weight 10 Oz.,CHT 100-800F and EGT 700-1700F. Made in USADimensions: 3X3.75X3.75

4 electric instruments in one standard size 3-1/8" aircraft case. Weight: only 6 oz. Guaranteed for accuracy within 2%. One year warranty. Get fo...

4 electric instruments in one standard size 3-1/8" aircraft case. Weight: only 6 oz. Guaranteed for accuracy within 2%. One year warranty. Get fou...

Tachometer (3AT3-2) 3500 RPM, 3 1/8" square, mag or std pt ign., 1 or 2 imp/rev. Made in USADimensions: 3X3.75X3.75

Westach tachometers for dual ignition. Made in USADimensions: 3X3.75X3.75

3-1/8" Runs directly off magneto. 12V power required to run Hourmeter. All Pressure Instruments come complete with Pressure Senders only (matched ...

Tachomter 500-3,500 RPM kit, 3-1/8" square, 1/2 to 1 ratio. adjustable with 303DGT sender, 444-2 tang, 208-SS-SS cable. Does not come with a sende...

Add-on kits for single position system already installed. Consists of selector switch and 3 or 5 probes for CHT or EGT to provide analyzer for 4 ...

10' and 5', 4 wire and 2 wire "Extension Leads" ideal for quick and easy extending CHT, EGT or Tach leads with simple slide together female ends...

Complete engine analyzer kits include EGT gauge, selector switch and probes for each cylinder 6 c...

Replaced with AP-24-D120-5V, Capacitance fuel lever sender 24", non-bendable, may be cut to 4", 12/24 vdc (28v max)input, 0-5 vdc output, 4 wire. ...

Capacitance fuel level sender 24" long, 3" bendable section, 1/4" OD, 12 or 24 VDC (28V MAX) input, 0-5 VDC output, 4 wire

Capacitance fuel level sender 12" long, 3" bendable section, 1/4" OD, 12 or 24 VDC (28V MAX) input, 0-5 VDC output, 5 wire (Two black, one red, o...

Westach Fuel Sender (24", 5" bend, section). Made in USADimensions: 3.5X3.5X25

Non-TSOd fuel quantity indicators available for single or dual tanks. Requires 0-5V capacitance senders (not incl.) Note: Westberg 712 Series Ther...