Bearings

NOT FAA/PMA approved. Timken wheel bearings cup 13830 Series 13800 Single Cup; 2 1/2" OD x 3/8" Wide; 0.030" Maximum Housing Fillet Radius; St...

Protect the spherical bearing of rod ends. This patented design features a neoprene rubber seal bonded directly to an aircraft quality ...

Timken wheel bearing cup LM67010 Series LM67000 Single Cup; 2.328" OD x 0.4650" Wide; 0.050" Maximum Housing Fillet Radius; Standard Tolerance N...

These bearings are spherical on the outside and are contained in a flanged, stamped metal cage, so they provide sliding, rotating, and p...

Surface Check fittings of the MS15000 series have spring-loaded ball check in the tip. MS15001-4 Thread: 1/4-28 Tapered Shank Length: 3/16 Th...

Protect the spherical bearing of rod ends. This patented design features a neoprene rubber seal bonded directly to an aircraft quality ...

FAA/PMA approved Timken wheel bearing cup A4138 Series A4000 Single Cup; 1.377" OD x 0.3437" Wide; 0.050" Maximum Housing Fillet Radius; Standar...

Surface Check fittings of the MS15000 series have spring-loaded ball check in the tip. MS15001-1 Thread: 1/4-28 Tapered Shank Length: 3/16 Th...

Sintered Bronze Oil Impregnated BearingsDimensions: .75X1.75X1.75

CM-S & CB-S Series Male Rod Ends with Studs, General Purpose - Economy Body - Carbon steel, protective coated for corrosion resistance. B...

Surface Check fittings of the MS15001 series have spring-loaded ball check in the tip. MS15002-1 Thread: 1/4-28 Tapered Shank Length: 5/32 Thr...

Timken bearing LM67048 LM67000 Series Single Cone; 1 1/4" Straight Bore; 0.6600" Wide; Standard Tolerance Not FAA approved Dimensions: 1X2.25X...

Cast Bronze bearings fit a wide range of applications. Key Benefits: High Strength Excellent MachinabilityDimensions: .25X.25X.5

Surface Check fittings of the MS15001 series have spring-loaded ball check in the tip.Dimensions: .5X.5X.5

MW, MG-TM & MM, MB-TM Series are Equivalents to Heim HFE & HME Series Dimensions: .375X.75X2.25

GMM-M & GMB-M Series Male Rod Ends, General Aviation - Precision Body - Carbon steel, protective coated for corrosion resistance. Race - C...

SYMMCO SF610-3 Bushing Dimensions: .25X.5X.5

FAA/PMA approved Timken wheel bearing cup 13836 Series 13800 Single Cup; 2 9/16" OD x 3/8" Wide; 0.030" Maximum Housing Fillet Radius; Standard...

Dimensions: .375X.5X.5

Hex: 1/2 Inch Thread: 5/16-18 Ball: 10 mm

Surface Check fittings of the MS15000 series have spring-loaded ball check in the tip. MS15001-5 Thread: 1/8 NPT Shank Length: 9/32 Thread Le...

Female thread 1/4-28/Male Thread 1/4-28 Applications: Light to medium duty linkage, including: Experimental Only. Not FAA Approved Cable assembl...

KS Series Bearings MS27645Dimensions: .5X2X2

The bearings supplied by our partners are used in a variety of applications to include: Flight Controls Doors Engines Landing Gear Accessories I...