Bearings

Rod Ends male threaded (M M Series) Outer member: Aircraft Quality Steel, Magnetic particle inspected, with protective coating for corrosion resi...

Sintered Bronze Oil Impregnated BearingsDimensions: .75X1.75X1.75

CM-S & CB-S Series Male Rod Ends with Studs, General Purpose - Economy Body - Carbon steel, protective coated for corrosion resistance. B...

Surface Check fittings of the MS15001 series have spring-loaded ball check in the tip. MS15002-1 Thread: 1/4-28 Tapered Shank Length: 5/32 Thr...

Timken bearing LM67048 LM67000 Series Single Cone; 1 1/4" Straight Bore; 0.6600" Wide; Standard Tolerance Not FAA approved Dimensions: 1X2.25X...

Cast Bronze bearings fit a wide range of applications. Key Benefits: High Strength Excellent MachinabilityDimensions: .25X.25X.5

Surface Check fittings of the MS15001 series have spring-loaded ball check in the tip.Dimensions: .5X.5X.5

MS21150 SAE-AS6039 Precision series Double row, ball, self-aligning 10° permissible misalignment in either direction These bearings are...

KS Series Bearings MS27645Dimensions: .5X2.5X2.5

In 1971 Aurora Bearing Company entered the rod end and spherical bearing market and soon became a major force in the rod end industry. Over the ...

MW, MG-TM & MM, MB-TM Series are Equivalents to Heim HFE & HME Series Dimensions: .375X.75X2.25

GMM-M & GMB-M Series Male Rod Ends, General Aviation - Precision Body - Carbon steel, protective coated for corrosion resistance. Race - C...

SYMMCO SF610-3 Bushing Dimensions: .25X.5X.5

FAA/PMA approved Timken wheel bearing cup 13836 Series 13800 Single Cup; 2 9/16" OD x 3/8" Wide; 0.030" Maximum Housing Fillet Radius; Standard...

The bearings supplied by our partners are used in a variety of applications to include: Flight Controls Doors Engines Landing Gear Accessories I...

Dimensions: .375X.5X.5

In 1971 Aurora Bearing Company entered the rod end and spherical bearing market and soon became a major force in the rod end industry. Over the ...

CM-S & CB-S Series Male Rod Ends with Studs, General Purpose - Economy Body - Carbon steel, protective coated for corrosion resistance. B...

Hex: 1/2 Inch Thread: 5/16-18 Ball: 10 mm

Surface Check fittings of the MS15000 series have spring-loaded ball check in the tip. MS15001-5 Thread: 1/8 NPT Shank Length: 9/32 Thread Le...

Female thread 1/4-28/Male Thread 1/4-28 Applications: Light to medium duty linkage, including: Experimental Only. Not FAA Approved Cable assembl...

Single row, ball, deep groove, medium duty PTFE seals and CRES sealcaps Exposed surfaces except bore, caps, and seals are cadmium plated Prelubri...

KS Series Bearings MS27645Dimensions: .5X2X2

The bearings supplied by our partners are used in a variety of applications to include: Flight Controls Doors Engines Landing Gear Accessories I...