Controls

This control has 10-32 threaded ends with 8 degree swivel & 3-3/8" stroke on both ends. It has Teflon casing liner for use in high-temperatu...

A-1550-0960 96 Inch Control. Made in USA Dimensions: 2X14X14

Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11/16" per 360 ...

We represent a manufacturer of replacement parts for light aircraft, currently producing about 800 FAA-PMA parts that fit Cessna and Piper aircraf...

The A-790 vernier control has a .078" dia. stainless steel wire core. Both the wire and Teflon lined flexible casing may be shortened as required....

SLOTTED BRACKET CONTROL MOUNT (PN 10465) Notch of end fitting locks into slot of bracket to secure control. Steel Construction. Inclu...

The A-970 vernier control is similar to the Model A-750 but with 1/4-28 threaded end (non-swiveling). Casing has Teflon inner liner for low fricti...

Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11/16" per 360 ...

The A-800-12 friction-lock throttle control are approved for Cessna 172, 172A thru Q; Cessna 150, 150A thru M, A150K, A150L, A150M; Cessna...

Adjustable friction throttles with same construction as the ACS A-800 friction throttle but with a large (2" dia.) black ...

Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11/16" per 360 ...

Non-Locking Choke Controls for Dual Carburetor Rotax 912/914 Series Engines Allows a neat, clean installation without a clunky splitter box Th...

Adjustable friction throttles with same construction as the ACS A-800 friction throttle but with a large (2" dia.) black ...

(Solid Wire End) Simple design for push-pull operation with low friction characteristics. Has .050" dia. stainless steel wire core in flexible met...

The A-810 friction lock control is similar to the A-800 control but with 1/4-28 threaded end (non-swiveling). With Teflon liner. Travel: 3-3/8...

(7/16-20 UNF-2A Threads / Solid Wire End) Provides a 10-lb. locking force for light and medium service applications. Blac...

Friction Control Knob- add to any unitDimensions: .625X1X1

Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11/16" per 360 ...

The A-820 friction lock control is similar to the A-800 control but with a solid wire end like the A-790 control. With Teflon liner. Travel: 3-3/8...

This control has 10-32 threaded ends with 8 degree swivel & 3-3/8" stroke on both ends. It has Teflon casing liner for use in high-temperatu...

These quadrants are made from aircraft quality anodized aluminum for long life and corrosion resistance. Brass friction plates are adjustable to f...

(Solid Wire End) Ratchet design provides detented positions under vibration conditions. Simple push-pull operation. Has .0...

(7/16-20 UNF-2A Threads / Solid Wire End) Provides a 10-lb. locking force for light and medium service applications. Blac...

The A-750 vernier control has a 10-32 threaded shaft for use with a ball point or threaded terminal. Unique ball-socket construction ...