Controls

The A-790 vernier control has a .078" dia. stainless steel wire core. Both the wire and Teflon lined flexible casing may be shortened as required....

Pre-formed .025" thick aluminum fairings for rudder cable exit on RV fuselages. (None are supplied with the RV kits). Set contains (2) identical f...

These cables are applicable to 170A and 172RG models. You may purchase cables separately or in complete cable kits. The new cables are included wh...

McFarlane Aviation offers FAA/PMA approved throttle, propeller, and mixture controls for most single engine Cessna and Piper aircraft. For spe...

Non-Locking Choke Controls for Dual Carburetor Rotax 912/914 Series Engines Allows a neat, clean installation without a clunky splitter box Th...

(10-32 Threaded End) A-1750 Vernier Control: features - removable button and facenut and 2" of control panel threads for those difficult mount...

(10-32 Threads / Solid Wire End) Same as A-920 control except one end is .078" dia. stainless steel wire. Special-length controls not requ...

The A-800 friction lock control provides positive locking at any power setting by turning the chrome collet locking nut. Unique ball-socket constr...

The A-790 vernier control has a .078" dia. stainless steel wire core. Both the wire and Teflon lined flexible casing may be shortened as required....

Use these stainless steel extensions for moderate length adjustments to stock length controls. Stocked with one male and one female threaded end. ...

Round pressure-sensitive labels, 3/4-Inch diameter. White lettering on black background.Dimensions: .01X1X1

The A-750 vernier control has a 10-32 threaded shaft for use with a ball point or threaded terminal. Unique ball-socket construction ...

SLOTTED BRACKET CONTROL MOUNT (PN 10465) Notch of end fitting locks into slot of bracket to secure control. Steel Construction. Inclu...

Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11/16" per 360 ...

Use these stainless steel extensions for moderate length adjustments to stock length controls. Stocked with one male and one female threaded end. ...

Round pressure-sensitive labels, 3/4-Inch diameter. White lettering on black background.Dimensions: .01X1X1

T-Handle dash control manufactured of duralumin and brass. Locks positively, will not vibrate loose. One-fourth turn locks it in any po...

This Fitting is designed for use on coaxial type control cables. It has a two piece design to allow it to be placed over the cable inserted thru t...

Large (2-Inch diameter) black solid plastic knob for the ACS A-800 friction throttle.Made in USA Dimensions: 1.5X1.5X1.5

Piper and Mooney aircraft do not have control locks. That's why there is now a Control Saver control lock to meet the needs of pilots who fly ...

Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11/16" per 360 ...

Measures .064 (1.5mm) diameter 1 x 19 construction. Equivalent to #7407. Ready to accept solder swage 15-04618. Fits inside either 15-05164 or...

Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11/16" per 360 ...

(Solid Wire End) Simple design for push-pull operation with low friction characteristics. Has .050" dia. stainless steel wire core in flexible met...