Controls

Use these stainless steel extensions for moderate length adjustments to stock length controls. Stocked with one male and one female threaded end. ...

Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11/16" per 360 ...

Round pressure-sensitive labels, 3/4-Inch diameter. White lettering on black background.Dimensions: .01X1X1

T-Handle dash control manufactured of duralumin and brass. Locks positively, will not vibrate loose. One-fourth turn locks it in any po...

This Fitting is designed for use on coaxial type control cables. It has a two piece design to allow it to be placed over the cable inserted thru t...

Non-Locking Choke Controls for Dual Carburetor Rotax 912/914 Series Engines Allows a neat, clean installation without a clunky splitter box Th...

Adjustable friction throttles with same construction as the ACS A-800 friction throttle but with a large (2" dia.) black ...

(Solid Wire End) Simple design for push-pull operation with low friction characteristics. Has .050" dia. stainless steel wire core in flexible met...

Large (2-Inch diameter) black solid plastic knob for the ACS A-800 friction throttle.Made in USA Dimensions: 1.5X1.5X1.5

The A-810 friction lock control is similar to the A-800 control but with 1/4-28 threaded end (non-swiveling). With Teflon liner. Travel: 3-3/8...

(7/16-20 UNF-2A Threads / Solid Wire End) Provides a 10-lb. locking force for light and medium service applications. Blac...

Friction Control Knob- add to any unitDimensions: .625X1X1

Piper and Mooney aircraft do not have control locks. That's why there is now a Control Saver control lock to meet the needs of pilots who fly ...

Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11/16" per 360 ...

The A-820 friction lock control is similar to the A-800 control but with a solid wire end like the A-790 control. With Teflon liner. Travel: 3-3/8...

This control has 10-32 threaded ends with 8 degree swivel & 3-3/8" stroke on both ends. It has Teflon casing liner for use in high-temperatu...

Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11/16" per 360 ...

These quadrants are made from aircraft quality anodized aluminum for long life and corrosion resistance. Brass friction plates are adjustable to f...

Measures .064 (1.5mm) diameter 1 x 19 construction. Equivalent to #7407. Ready to accept solder swage 15-04618. Fits inside either 15-05164 or...

(Solid Wire End) Ratchet design provides detented positions under vibration conditions. Simple push-pull operation. Has .0...

(7/16-20 UNF-2A Threads / Solid Wire End) Provides a 10-lb. locking force for light and medium service applications. Blac...

The A-750 vernier control has a 10-32 threaded shaft for use with a ball point or threaded terminal. Unique ball-socket construction ...

Note: General rule for installation: Tach cable should be installed as straight as possible - the inner cable length will decrease 11/16" per 360 ...

(Solid Wire End) Simple design for push-pull operation with low friction characteristics. Has .050" dia. stainless steel wire core in flexible met...