Aeroduct CEET-10 Ducting 2-1/2 10Foot Piece

CEET - CEET type ducting has two plies of neoprene-impregnated fiberglass, similar to CAT except wire between plies. For use in hot or cold air applications and for conveying fumes at temperatures ranging from -65° to over 350°F. Not recommended for handling liquids or highly abrasive materials, or for negative pressure applications.

Sold in full length only - cannot be cut to size.

Features: Fabric liner on the inside diameter of the ducting allows the air to flow smoothly even in tight bends. Thus, CEET has less air friction loss than ducting which is unlined.

Diameters not listed are available as a special order in full lengths only. Order CAT 2-3/4" diameter for Whisperflow air vents. For lengths over 10 ft, contact sales to confirm availability.

Other Ducting Types

• CAT - CAT type flexible hot or cold air ducting is extremely lightweight and highly flexible. Short lengths can be joined together to form a continuous length. Made of a single ply black neoprene impregnated fiberglass with a spiral copper coated steel wire inside and wrapped with fiberglass cord on the outside. Suitable for conveying fumes and air a temperatures from -65° to over 350°F. Not recommended for handling liquids or highly abrasive materials, or for negative pressure applications.
  
  
  
  
• SCAT - SCAT type ducting has the same type construction as CAT except with red silicone rubber impregnation. For use in conducting extremely cold or hot air with temperatures from -65° to over 550°F. Not recommended for negative pressure applications.
  
  
  
  
• SCEET - SCEET type ducting has two plies of silicone rubber-im pregnated fiber glass, similar to SCAT except wire be tween plies. Ideal for use in conducting extremely cold or hot air at temperatures from -80° to over 550°F, and for conveying fumes. Not recommended for handling liquids or highly abrasive materials, or for negative pressure applications.
  
  

Dimensions: 3X3X46