Electrical

Note: GE is no longer producing bulbs. Martek now produces the lamps using the original molds. Packaging may vary. All lamps provided will be OEM ...

The Gill 7638-48P is a Original Equipment (OEM) for Embraer EMB 505 Aircraft No additional STC Hardware is required Maintenance Free Shipped ...

Nylon Bulkhead seals are used when electrical harnesses or tubing is passed through bulkheads in pressurized and non- pressurized aircraft. Note: ...

The SX-200, SX-201 and SX-202 genuine Italian lambskin hand grips each may be installed on either a left or right hand control handle. Painstaki...

Finger grip knob for panel light dimming rheostat (see accessory). 1 1/2" Diameter, 1/4" Hole.Dimensions: .75X1.5X1.5

These MS25226 series buss bars are used as replacement bars for MS27212 board assemblies.Dimensions: .0625X.5X5.75

Product (Aviation) - The 71450 Series LED (Light Emitting Diode) instrument post light assemblies are designed to illuminate the instrument p...

Note: ( ) denotes Momentary action. These miniature toggles are rugged, highly reliable switches offering positive detent action for safe switch...

Gromstrip is a continuous length of extruded U-channel for use as a protective covering on sharp edges. It can be cut to desired length and inse...

Singlephase TC devices are the smallest, lightest high performance aircraft circuit breakers available today. They represent the state-of-th...

NULITEs are a revolutionary lighting system for aircraft instruments. They give the same lighting appearance as internal lighting kits at a f...

NOW FAA NORSEE APPROVED Multi-Color Aircraft LED Maplighting. For Experimental, Amateur-Built aircraft only.   The body of the maplight...

Long life incandescent and halogen lamps offer greater light output with increased life and reduced costs. All lamps feature heavy filament c...

Carling Technologies sealed V-Series Contura switches are well known for their cutting edge design, high quality, maximum performance and unmatch...

This is a replacement Whelen W5500691 Flashing Anti-Collision Light Motor Assembly with 28V D.C.

71110 series is a wing tip mounted strobe anti-collision/position light assembly utilizing LED's for the forward position lights. The LED'...

This device converts the momentary contact action of the ROS-4 4-way switch, or any SPST pushbutton switch, into a DPDT action ...

The control stick grips from Flight Grip are modular in design to allow maximum flexibility when specifying switches to control the various electr...

Please Note: GE lighting was purchased by Tungsram.GE | Tungsram Sealed Beam Lamps for Landing & Taxi Lights. All bulbs are identical, but pa...

Note: Connector kits will work with 20 to 22 AWG wire sizes. The Sealed CPC using UL F1-rated resin is ideal for UV resistance in outdoor applic...

71105 series are fully FAA TSO compliant Forward Position lights. LEDs provide a significant reduction in electrical current dra...

Wamco Q5596 Par36 28-Volt 250 Watt Quartz Lamp

Installation Tool for Protect-Fast AERO Braided PFA-PFW Sleeving. This tool is a perfect fit for feeding cable into the braided wrap.

These homebuilt control grips are made of high-strength urethane plastic, finish painted in matte black and come complete with all necessary ha...