Electronics International

P-128: Oat uses a precision connector Oat Probe 1/4-28" Thread 700 Degrees Fahrenheit Max.

Note: CP-1 can be used with all EI gauges except the MVP and CGR units. For those units, the CP-1A (Part # 10-06280) must be used. Control...

Secondary optional Volt/AMP Module. Requires two channels on the UBG. One for the Volts and another for Amps. You do not have to connect both. Th...

PT-30ABS-MVP Absolute Pressure Transducer, 0 to 40 In Hg (Manifold Press or Cabin Altitude).

P-128: Carb Temp uses a precision connector Carb Temp 1/4-28" Thread 700 Degrees Fahrenheit Max.

This unit generates a 4.7KHz tone when an out-of-limit condition occurs. The Annunciator Tone Generator may be connected to one or more EI Instru...

EI PT-100GA pressure transducer, 0 - 120 PSI, 1/8" NPT. Dimensions: .67X5.5X8.5

The OLC-2 eliminates the needs for soldering, crimps, and expensive connectors, all while creating a perfect connection between two wires. Th...

EI PT-30GA pressure transducer, 0 - 40 PSI, 1/8" NPT. E.I. products include all documentation and certifications Dimensions: 1X5X9

The line of Electronics International digital instruments offers precise ...

EI MVP Option, High Manifold Pressure, 0 - 70 in. HG.Dimensions: 6X6.5X9.25

Electronics International Primary Volt/Amp Instrument VA-1A-300

P-120 Oil Temperature Probe can be used in a pressure environment, 700 Degrees Fahrenheit Max. E.I. products include all documentation and certi...

CHT Probe, Military Bayonet Type, 1/4 turn locking for quick removal, To be used with the A-101 Adaptor, 700 Degrees Fahrenheit Max. Dimensions: ....

Makes a 2-1/4" EI instrument look excellent in a 3-1/8" mount. Black anodized, brushed alumnimum matches the instruments. Use the A-103 to mount ...

A-101: CHT Adaptor, 3/8" - 24, To be used with the P-101 CHT Probe. Dimensions: .5X.625X.875

P-110 Probes including: Standard & Fast Response with or without 6ft lead - Hose Clamp type P-110-R - EGT/TIT Probe - Hose Clamp...

Voltage Interface Unit. Allows any temperature or fuel level channel on our EDC to measure the output voltage of any device. This voltage meas...

P-110 Probes including: Standard & Fast Response with or without 6ft lead - Hose Clamp type P-110-R - EGT/TIT Probe - Hose Clamp...

Differential Pressure Transducer, 0 to 6 In Hg (Vacuum Pressure, Airspeed, Cabin Differential Pressure).Dimensions: 3.25X4.25X5.625

The line of Electronics International digital instruments offers precise readings at exceptional prices. All gauges are accurate...

Two primary features of the FP-5 are a pilot programmable low fuel alert and a pilot programmable low time to empty alert. These alert...

Note: CP-1 can be used with all EI gauges except the MVP and CGR units. For those units, the CP-1A must be used. Controls the intensity of ...

Two primary features of the FP-5 are a pilot programmable low fuel alert and a pilot programmable low time to empty alert. These alert...