Engine Accessories
Spark Plug Wrench
Loosen or tighten your spark plugs with this handy tool. 2 ends: 13/16" & 3/4"Dimensions: 1X1X4
Nylon Starter Rope
The perfect replacement rope for worn-out manual starters. Sold by the foot.
AV13-1521 Throttle Shaft
Avstar Throttle Shaft - AV13-1521.
15N19949OH Overhauled Camshaft
Overhauled Camshaft 15n19949OH
Airtech Rotax Gear BOX Clutch Tension Spring RK55
Air-Tech Rotax Clutch Tension Spring RK55 for Gear Box Clutch RK400C.
Precision Airmotive Lever Assy Idle 2537857B-F
Precision Airmotive Lever Assy, Idle 2537857B-F
Plastic Starter Handle
Black flexible plastic heavy duty handle. Tested to 40°F
COUPLER-377/477 W/O Hg-Thr MOD
PosiFlex coupler for Quicksilver.
Coupler-All High-Thrust Mods
PosiFlex coupler for Quicksilver.
RPX Technologies Drybot Adaptor - B
Note:DryBot Automated engine dehydrator not included RPX Technologies DryBot AdaptorDimensions: 4X4X8
Precision Airmotive Throttle Stop PIN CF655791
Precision Airmotive Throttle Stop Pin
Evans Prep Fluid Gallon
Evans Prep Fluid is a waterless cooling system flush engineered specifically to purge the cooling system of water-based antifreeze after draining ...
View full detailsAirtech Rotax Gear BOX Clutch Assembled RK400C
The primary purpose of the clutch is to disengage the prop from the engine allowing it to start and operate at idle without ...
View full detailsV-Belt D35.00
This V-Belt has received FAA-PMA approval for a high quality V-Belt used on many Piper aircraft.
Thermo-Tec Aluminized Heat Barrier 18X20
The Aluminized Heat Barrier is made up of woven silica with a flexible aluminized finish. The highly-reflective surface of th...
View full detailsAWI Piper PA28 180 181 Clamp
The Carb Heat Clamp for Piper models: PA28-150, PA28-160, PA28-180 S/N 28-1761 & up. Dimensions: 12X17X24
Tanis Engine Pickle KIT 6 CYL
4 & 6 Cylinder Lycoming or Continental Engine Preservation Kit: recommended by engine manufacturers for storage of an engine longer than 90 ...
View full detailsCarb Heat Connector FOR 2
Mounts on FAB airbox or similar airbox. Flange accepts 2 scat tube from muff. Standoff design allows hot air to escape when carb heat is not sel...
View full detailsCoolanol 1/2 Gallon JUG
Mineral deposits from regular tap water can collect on the Rotary Valve Shaft causing the seals to leak. Avoid this costly repair with this rea...
View full detailsThermo-Tec Aluminized Heat Barrier 36X20
The Aluminized Heat Barrier is made up of woven silica with a flexible aluminized finish. The highly-reflective surface of th...
View full detailsSeafoam Motor Treatment SF-16 16 OZ
Sea Foam 16 oz. motor treatment for gas and diesel engines For use in gas, ethanol, diesel or biodiesel engines. Internal engine use on...
View full detailsV-Belt A37.50
Replace your old worn belt with a high-quality FAA-PMA approved McFarlane V-belt!FAA-PMA Approved for specific engine Each lot is tested for stre...
View full detailsTCM 24031 Valve Spring
Continental Inner Valve Spring Used on C90 & O-200 Engines
V-Belt A37.50
This V-Belt has received FAA-PMA approval for a high quality V-Belt used on many Piper aircraft.