Engine Accessories

Evans High Performance (HP) Waterless Coolant is a revolutionary coolant providing dramatic improvements in heat transfer without requiring chang...

Thermo-Tec's Heavy-Duty Spray Adhesive is a fast-drying, quick-bonding, high-temperature contact adhesive. Use it wherever you need a s...

Mineral deposits from regular tap water can collect on the Rotary Valve Shaft causing the seals to leak. Avoid this costly repair with this rea...

Fuel flow to your aircraft's engine can be compromised by insects or debris entering fuel tank vents. This remove-before-flight Fuel Vent S...

Install TopCap in place of a removed cylinder to protect the engine from dirt, debris, and stray parts. Made from fuel and solvent re...

The Aluminized Heat Barrier is made up of woven silica with a flexible aluminized finish. The highly-reflective surface of th...

Tempest Silica Blue Gel is for use with the Tempest AA1000 Engine Preservation System. All engines accumulate moisture when they are not run e...

This heat shield is placed on exhaust where fuel lines, cable, etc. are close to exhaust and where heat...

These kits include new shaft & bearings. Kit for Cont. C-85, C-90, 0-200 Engine P/N 07-00110. Kit for Cont. C-145, 0-300 Engine P/N 07-...

LYCOMING CHROME COMPRESSION RING - 74241Dimensions: .08X5.5X5.5

Avglas STC, FAA-PMA repair kits for approved Continetal carburetor heat boxes are now manufactured by McFarlane Aviation. The Teledyne/Continental...

This V-Belt has received FAA-PMA approval for a high quality V-Belt used on many Piper PA28 and PA32 aircraft. Direct replacement for s 1006...

Air-Tech Rotax Gear Box Clutch Bolt M10X16. 3 per clutch are needed.

Single Cylinder ring set for Continental Engine - For Steel Barrel Cylinders Only. OEM Part Number: 649632A1 Dimensions: 1X6.5X6.5

This V-Belt has received FAA-PMA approval for a high quality V-Belt used on many Piper aircraft.

Lycoming Camshaft Follower Tappet Assembly 15B28739 Part # 15B26091 superseded to part # 15B28739 Part # 71105 superseded to part # 15B26091 ...

Accepts 2 ducting on both ends. Helps route ducting through bulkheads, firewalls, etc. Especially useful for getting heat to the back seat of the ...

"Y" tube is designed to be used with the Homebuilders cabin heat box to make warm air available to 2 or more locations in the aircraft. Construct...

This part replaces Cessna 0750121. This intake Heat Shield Deflector is vibration dampened to prevent cracking! It is made of polished sta...

Use this kit to repair an elongated hole in the carburetor heat box actuating arm. Kit comes complete with new bolt and attaching hardware made of...

Fuel flow to your aircraft's engine can be compromised by insects or debris entering fuel tank vents. This remove-before-flight Fuel Vent S...

This in-line valve connects to 2 SCAT ducting. It can be hooked up in any combination to direct air to either heater outlets or defrost outlets. ...

"Y" tube is designed to be used with the Homebuilders cabin heat box to make warm air available to 2 or more locations in the aircraft. Construct...

This V-Belt has received FAA-PMA approval for a high quality V-Belt used on many Piper aircraft.