Engine Accessories
Filters
Precision Airmotive Cover CF625900
Precision Airmotive Cover CF625900
Continental AEL13884M003 Bearing
Bearing, Crankshaft Front Main, U/S .003. PMA Approved.
RPX Technologies Automated Engine Dehydrator KIT With Accessories - UK Power Cord
Cheaper than an overhaul! The DryBot engine dehydrator is totally automated and can be left unattended. It's designed to maintain internal engine...
View full detailsSuperior Rocker Shaft SA539740
CONTINENTAL ROCKER SHAFT - SA539740Dimensions: .75X.75X2.34
Spark Plug Wrench
Loosen or tighten your spark plugs with this handy tool. 2 ends: 13/16" & 3/4"Dimensions: 1X1X4
Nylon Starter Rope
The perfect replacement rope for worn-out manual starters. Sold by the foot.
18E23886-M06 Lycoming Crankshaft Bearing
18E23886-M06 Lycoming Crankshaft Bearing for Cessna Aircraft.
AV13-1521 Throttle Shaft
Avstar Throttle Shaft - AV13-1521.
15N19949OH Overhauled Camshaft
Overhauled Camshaft 15n19949OH
Airtech Rotax Gear BOX Clutch Tension Spring RK55
Air-Tech Rotax Clutch Tension Spring RK55 for Gear Box Clutch RK400C.
Precision Airmotive Lever Assy Idle 2537857B-F
Precision Airmotive Lever Assy, Idle 2537857B-F
Plastic Starter Handle
Black flexible plastic heavy duty handle. Tested to 40°F
COUPLER-377/477 W/O Hg-Thr MOD
PosiFlex coupler for Quicksilver.
Coupler-All High-Thrust Mods
PosiFlex coupler for Quicksilver.
RPX Technologies Drybot Adaptor - B
Note:DryBot Automated engine dehydrator not included RPX Technologies DryBot AdaptorDimensions: 4X4X8
Precision Airmotive Throttle Stop PIN CF655791
Precision Airmotive Throttle Stop Pin
Evans Prep Fluid Gallon
Evans Prep Fluid is a waterless cooling system flush engineered specifically to purge the cooling system of water-based antifreeze after draining ...
View full detailsAirtech Rotax Gear BOX Clutch Assembled RK400C
The primary purpose of the clutch is to disengage the prop from the engine allowing it to start and operate at idle without ...
View full detailsV-Belt D35.00
This V-Belt has received FAA-PMA approval for a high quality V-Belt used on many Piper aircraft.
Thermo-Tec Aluminized Heat Barrier 18X20
The Aluminized Heat Barrier is made up of woven silica with a flexible aluminized finish. The highly-reflective surface of th...
View full detailsSuperior Cont Ring SET Chrome Barrel SA1000-SC
Single Cylinder ring set. OEM Part Number: 653394 - For Chrome Barrel Cylinders Only
AWI Piper PA28 180 181 Clamp
The Carb Heat Clamp for Piper models: PA28-150, PA28-160, PA28-180 S/N 28-1761 & up. Dimensions: 12X17X24
TCM Bearing KIT 646597A1M010AR1
Continental OEM Parts
Slick T150 E GAP CAGE3
Tool Gauge Gap. Will work on Lycoming and Continental engines.