Engine Accessories

Precision Airmotive Throttle Stop Pin

Evans Prep Fluid is a waterless cooling system flush engineered specifically to purge the cooling system of water-based antifreeze after draining ...

The primary purpose of the clutch is to disengage the prop from the engine allowing it to start and operate at idle without ...

This V-Belt has received FAA-PMA approval for a high quality V-Belt used on many Piper aircraft.

The Aluminized Heat Barrier is made up of woven silica with a flexible aluminized finish. The highly-reflective surface of th...

Single Cylinder ring set. OEM Part Number: 653394 - For Chrome Barrel Cylinders Only

The Carb Heat Clamp for Piper models: PA28-150, PA28-160, PA28-180 S/N 28-1761 & up. Dimensions: 12X17X24

Continental OEM Parts

Tool Gauge Gap. Will work on Lycoming and Continental engines.

Not FAA Approved Fits Cessna 120, 150, 140, and PA-22 Tripacer. Order filter, gaskets, studs & pins separately. Dimensions: 1X5X6

Heat damaged O-470 & O-520 engine mounts are a definite problem area. You can easily protect these engine mounts from further damage with thes...

4 & 6 Cylinder Lycoming or Continental Engine Preservation Kit: recommended by engine manufacturers for storage of an engine longer than 90 ...

The Aluminized Heat Barrier is made up of woven silica with a flexible aluminized finish. The highly-reflective surface of th...

2 ALUMINUM FLANGE - Accepts 2 scat tube. Flange allows riveting to firewall, baffles, etc. Wt: 0.2 oz.Dimensions: 1X2.5X2.5

Similar to Cessna 170 box. Fits Lyc. 0-360, 0-470, etc. Uses brackett BA-5110 filter.Dimensions: 6X7X13

Evans High Performance (HP) Waterless Coolant is a revolutionary coolant providing dramatic improvements in heat transfer without requiring chang...

Mounts on FAB airbox or similar airbox. Flange accepts 2 scat tube from muff. Standoff design allows hot air to escape when carb heat is not sel...

Thermo-Tec's Heavy-Duty Spray Adhesive is a fast-drying, quick-bonding, high-temperature contact adhesive. Use it wherever you need a s...

Mineral deposits from regular tap water can collect on the Rotary Valve Shaft causing the seals to leak. Avoid this costly repair with this rea...

Fuel flow to your aircraft's engine can be compromised by insects or debris entering fuel tank vents. This remove-before-flight Fuel Vent S...

Install TopCap in place of a removed cylinder to protect the engine from dirt, debris, and stray parts. Made from fuel and solvent re...

Shell Dexcool® Antifreeze/coolant Shell DEX-COOL® Extended Life Antifreeze/Coolant is a single-phase, ethylene glycol based, extended life, uni...

The Aluminized Heat Barrier is made up of woven silica with a flexible aluminized finish. The highly-reflective surface of th...

Tempest Silica Blue Gel is for use with the Tempest AA1000 Engine Preservation System. All engines accumulate moisture when they are not run e...