Fasteners

A full grommet is used when protection of the hole is a definite consideration. It protects panel finish and reduces stud play. A tool is required...

CLoc® 2000 Series Stainless. 300lb Light duty fastening system. (No separate Grommet) 3/32 rivet, .750 spacing

2600 STUD LENGTH SELECTION Total material thickness G consists of the thickness of all materials to be fastened. This must include the thickness ...

Size Series: Large Size Head Recess Type: Stud (PDF) (PDF) (PDF)

The dash number represents the height ("H" dimension) of the spring. EXAMPLE: S3-150 = .150. All Dzus® products are available. Request quote on u...

Superior Quality Panel Fastener Manufacturing since 1982. U.S. Manufacturer & Distributor of the highest grade stainless steel ¼-Turn Panel F...

CLoc® 2000 Series Stainless. 300lb Light duty fastening system. (No separate Grommet) 3/32 rivet, .750 spacing

Type: Stud

CLoc® 4000 Series Grommets - Stainless Steel- TSO-C148 Approved.

To select the proper length stud, first select the grommet, for example 4002-G. Next, select the receptacle, such as 214-16. Afte...

2700 STUD LENGTH SELECTION Total material thickness G consists of the thickness of all materials to be fastened. This must include the thickness ...

2700 STUD LENGTH SELECTION Total material thickness G consists of the thickness of all materials to be fastened. This must include the thickness ...

2600 Series - Small enough to fit in limited mounting space and light weight. These Camloc fasteners have a 600# ultimate tensile load capacity...

Type: Stud

4002 Series Grommets and Snap Rings

Retaining washers are required for studs of -5 length or greater. Use split washer 2600- SW2 where it is desirable to have the stud fall awa...

Size Series: Large Size Head Recess Type: Stud (PDF) (PDF) (PDF)

The dash number represents the height ("H" dimension) of the spring. EXAMPLE: S3-150 = .150. All Dzus® products are available. Request quote on u...

CLoc® 4000 Series Fasteners SK4002S Collared Slot Stainless & SK40S5S Phillips Head Diamond head Stainless Rc 27 Anti-Gall TSO-C148 1050...

To select the proper length stud, first select the grommet, for example 4002-G. Next, select the receptacle, such as 214-16. Afte...

(PDF) Economy Fasteners - Similar to Dzus

4002 Series Grommets and Snap Rings

A full grommet is used when protection of the hole is a definite consideration. It protects panel finish and reduces stud play. A tool is required...

2700 STUD LENGTH SELECTION Total material thickness G consists of the thickness of all materials to be fastened. This must include the thickness ...