Skip to content

Hardware

Filters

$
$

Exhaust Rubber Bushing - Male

$0.70 - $0.70
$0.70
$0.70 - $0.70
$0.70
in stock

Exhaust Mounting Rubber Bushing - Female. Male and female exhaust bushings. Ideal for isolating parts from vibration and cracking. Measures: 1-3/...

View full details
$0.70 - $0.70
$0.70
$0.70 - $0.70
$0.70

Exhaust Rubber Bushing - Female

$0.59 - $0.59
$0.59
$0.59 - $0.59
$0.59
in stock

Exhaust Mounting Rubber Bushing - Female. Male and female exhaust bushings. Ideal for isolating parts from vibration and cracking. Measures: 1-3/...

View full details
$0.59 - $0.59
$0.59
$0.59 - $0.59
$0.59

Rotax Throttle Spring 7235 RH

$25.81 - $25.81
$25.81
$25.81 - $25.81
$25.81
in stock

A common complaint about the Rotax 912/914 engines is that the throttle return springs are too strong. McFarlane stocks a variety of springs ...

View full details
$25.81 - $25.81
$25.81
$25.81 - $25.81
$25.81

Solder BAR 1 1/2 LB

$80.73 - $80.73
$80.73
$80.73 - $80.73
$80.73
Only 1 left!

1 1/2 lbs. of the finest solder available to secure end fittings.

$80.73 - $80.73
$80.73
$80.73 - $80.73
$80.73

Ferrule END CAP - Standard

$1.03 - $1.03
$1.03
$1.03 - $1.03
$1.03
in stock

Slips over #7403 throttle housing. Can be crimped or rolled for a permanent installation. .20" ID x .22" OD x .445" Length Drilled for .064 wire.

$1.03 - $1.03
$1.03
$1.03 - $1.03
$1.03

Barrel END Fitting 503 Oiler Swage 2MM

$1.50 - $1.50
$1.50
$1.50 - $1.50
$1.50
in stock

Barrel End Fitting drilled for .080" (2mm) wire; O.D. .312" (7.9mm); length .350" (8.9mm) For Rotax 503 Oiler Swage.Dimensions: 1X1X1

$1.50 - $1.50
$1.50
$1.50 - $1.50
$1.50

Ball Adapters

$1.40 - $1.40
$1.40
$1.40 - $1.40
$1.40
in stock

Ball adapter with 1/4" mounting holes and 3/8" hole ball slide

$1.40 - $1.40
$1.40
$1.40 - $1.40
$1.40

Stainless Steel Sring Hook 7/16

$10.53 - $10.53
$10.53
$10.53 - $10.53
$10.53
in stock

Formed Stainless Steel Spring Hooks.Dimensions: .38X2.25X4.75

$10.53 - $10.53
$10.53
$10.53 - $10.53
$10.53

Barrel Stop Assembly 6515

$16.15 - $16.15
$16.15
$16.15 - $16.15
$16.15
in stock

Attach to the carburetor choke arm. No swaging or soldering necessary. For MCTL1014D series Turn-to-Lock Choke Controls and MCC101D series Non-Lo...

View full details
$16.15 - $16.15
$16.15
$16.15 - $16.15
$16.15

Midway Cable Adjuster M6X.1 Thread

$6.21 - $6.21
$6.21
$6.21 - $6.21
$6.21
in stock

For use the #7403 cable housing. Measures 2.75 but extends to 3.375 to remove slack from cable housing. Positive locking nut maintains adjustment.

$6.21 - $6.21
$6.21
$6.21 - $6.21
$6.21