Hardware

Socket Head Cap Screw-Stainless Steel-Undrilled

(PDF) CAD Plated fasteners are no longer available due to enviromental reasons. ( * ) :No longer available after our current stock is deplete...

Note: quantities must be entered in decimal format. (i.e. 0.25 for 1/4, 0.50 for 1/2, etc). Minimum Purchase 1/8 lb. (qty .13). "A" rivets are "so...

Cessna 150 Stainless Steel Cowl Set Dimensions: .5X1.5X6

Pan head low alloy steel machine screws have 125,000 to 145,000 psi tensile strength with cadmium plate finish to QQP416, Type 2, Class 3. MS27039...

MS27151 engine nuts replace AC356 Pal nuts. They are stamped from 1050 spring steel and cadmium plated per QQ-P...

These structural screws have a 100° countersunk head. Cadmium plated per QQ-P-416A, Type II, Class 3. Minimum tensile strength for steel is 125,...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

These pan head low alloy steel machine screws have 125,000 to 145,000 psi tensile strength w/cadmium plate finish to QQ-P-416, Type 2, Class 3. MS...

Screw, Phillips Hex Head Material - A-286 Corrosion Resisting Steel Finish - Passivate Per QQ-P-35

Phillips Hex Head Alloy Steel per MIL-S-6049 Finish - Cadmium per QQ-P-416 Type II Tensile - 160,000 - 185,000 PSI

Pan head low alloy steel machine screws have 125,000 to 145,000 psi tensile strength with cadmium plate finish to QQP416, Type 2, Class 3. MS27039...

Plug Buttons

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

MF5000-3(Manufactured Material Certification Available) 04-01941(MF5000-3 New Surplus Material-Certificate of Conformance Only)

These 82 degree flat head machine screws have 55,000psi minimum tensile strength and feature cadmium plate finish per QQ P-416, Type 2, Class 3....

Offset Cruciform 100 Deg Flush Head Material - Alloy Steel (8740) or Cres. (A-286) Heat Treat - 160,000 - 180,000 or PSI 160,000 - 190,000 P...

Skybolt Cloc® Receptacles.

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Screw, Phillips Hex Head Material - A-286 Corrosion Resisting Steel Finish - Passivate Per QQ-P-35

Clevis bolts have a slotted brazier type head. They are special-purpose bolts for use where a large shearing stress occurs (never in tension). M...

Zinc-Plated, Truss Head Type A (Pointed Tip Screw) & Type B (Blunt Tip Screw).