Hardware

These structural screws have a 100° countersunk head. Cadmium plated per QQ-P-416A, Type II, Class 3. Minimum tensile strength for steel is 125,...

These structural screws have a 100° countersunk head. Cadmium plated per QQ-P-416A, Type II, Class 3. Minimum tensile strength for steel is 125,...

Anchor nuts are designed for blind mounted applications where it is impractical to use hex nuts or where it is desirable to have an attached nut f...

These precision-made nuts are reliable and economical fastening devices The fiber insert gives a friction grip on the threads of the ...

These precision-made nuts are reliable and economical fastening devices The fiber insert gives a friction grip on the threads of the ...

AN960 flat washers are used under hex nuts to provide a smooth bearing surface, as shims to obtain the correct grip length for a bolt an...

AN960 flat washers are used under hex nuts to provide a smooth bearing surface, as shims to obtain the correct grip length for a bolt an...

Stainless Steel Lock Nut

Manufactured of carbon steel, cadmium plated per QQ-P-416C, Type II, Class 2. They provide a greater bearing area than AN960 washers. ...

High-strength machine screws fabricated from alloy steel per specification QQ-S-689. Tensile strength 125,000 PSI. Cadmium plated per QQ-P-416A,...

Truss-head non-structural machine screws made of carbon steel, cadmium plated. Minimum tensile strength 55,000 PSI. Available in slot head or Phi...

Truss-head non-structural machine screws made of carbon steel, cadmium plated. Minimum tensile strength 55,000 PSI. Available in slot head or Phi...

Phillips 100 Deg Flush Head, Close Tolerance, Short Thread Material - Alloy Steel (8740) Heat Treat - 160,000 - 180,000 Finish - Cadmium Pe...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Avex non-structural blind rivets, with aluminum body and steel stem, are similar to the Cherry BSP and BSC rivets. We stock the standard dome h...

SLEEVE, Coupling Black- Steel Blue-Aluminum

Washers for use with 100° flat-head screws such as MS24693 and MS24694 machine screws and NAS548 sheet metal screws to provide reinforced, low-pro...

Elbow, Flared Tube and Pipe Thread, 45°. Available in Aluminum(D) or Steel.

Oillite bronze bushings are highly heat resistant, ductile, conformable and corrosion resistant.

REDUCER, External Thread Dimensions: 1.13X1.13X1.52

Attention: Avdel has changed the mandrel design for some of their Cherry "N" Rivets. The change has not effected the strength of the rivet. CHE...

These structural screws have a 100° countersunk head. Cadmium plated per QQ-P-416A, Type II, Class 3. Minimum tensile strength for steel is 125,...