Hardware

Use screws for all panel installations to eliminate magnetic interference. Finish: Black Oxide Drive Type: Phillips

Stainless Steel Stop Nut

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

"A" rivets are "soft". They are fabricated from 1100-grade aluminum and have a tensile strength of 16,000 PSI. "AD" rivets are fabricated from 211...

A snap ring is used when there is not a lot of pull-out load. This ring is expandable easily installed with pliers or screwdriver and takes l...

OOPS Hole saver rivet kit. NAS 1097 rivets are 100º flush rivets with a smaller head. The 1/8 1097 rivet head is the same size diameter as th...

The Rivet Nut is a one-piece internally threaded and counterbored tubular aluminum rivet that can be pulled up or headed while working entirely fr...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

The self-plugging Cherry Blind Rivet is a 2 piece assy. - a hollow rivet and inner member or stem, drawn into or thru the hollow rivet. Ch...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Phillips pan head 300 Series stainless steel Finish - Passivate per QQ-P-35

These precision-made nuts are reliable and economical fastening devices The fiber insert gives a friction grip on the threads of the ...

COUPLING, Pipe Thread

(PDF) Economy Fasteners - Similar to Dzus

High-strength machine screws fabricated from alloy steel per specification QQ-S-689. Tensile strength 125,000 PSI. Cadmium plated per QQ-P-416A,...

Stainless Steel Lock Nut

Mechanics Hardware Kit with cabinets includes: (1) 26-Drawer & (1) 64-Drawer Storage Cabinets AN3 (10-32 size) Bolts from 1/2 to 3 long ...

Kit contains Southco or Camloc studs, washers, retainers & a push tool for the Southco studs. Receptacles for Camloc or Southco fasteners are ...

Socket Head Cap Screw-Stainless Steel-Undrilled

Phillips Pan Head Alloy Steel (8740) Finish - Cadmium per QQ-P-416 Tensile - 160,000 - 180,000 PSI

These bolts supercede NAS1104 high strength bolts. Thread 1/4-28 For Drilled Shank add "D" at end of .Dimensions: .5X.5X1.875

Pan head low alloy steel machine screws have 125,000 to 145,000 psi tensile strength with cadmium plate finish to QQP416, Type 2, Class 3. MS27039...

Clevis bolts have a slotted brazier type head. They are special-purpose bolts for use where a large shearing stress occurs (never in tension). M...

Note: quantities must be entered in decimal format. (i.e. 0.25 for 1/4, 0.50 for 1/2, etc). Minimum Purchase 1/8 lb. (qty .13). "A" rivets are "so...