Hardware

AN960 flat washers are used under hex nuts to provide a smooth bearing surface, as shims to obtain the correct grip length for a bolt and ...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

These bolts supercede NAS1104 high strength bolts. Thread 1/4-28 For Drilled Shank add "D" at end of .Dimensions: .5X.5X1

To select the proper length stud, first select the grommet, for example 4002-G. Next, select the receptacle, such as 214-16. Afte...

Nylo-Seal tube fittings are exceptionally strong. The bodies, made of nylon, are stronger than machined fittings of similar composition. They are ...

Note: quantities must be entered in decimal format. (i.e. 0.25 for 1/4, 0.50 for 1/2, etc). Minimum Purchase 1/8 lb. (qty .13). "A" rivets are "so...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Made of alloy steel per specification MIL-P-5673 and cadmium plated per QQ-P-416A, Type lI, Class 3. Provided with drilled hole for cotter...

Eye bolts are special purpose bolts to be used where external tension loads are to be applied. The eye is designed for attachment of such devic...

2700 STUD LENGTH SELECTION Total material thickness G consists of the thickness of all materials to be fastened. This must include the thickness ...

These pan head machine screws feature 60,000 psi min. tensile strength & are cadmium plated to specification QQ- P-416, Type 2, Class 3. Manuf...

These Aeroquip sockets are for use with the Aeroquip nipple assemblies AE21496.

NA17 MS21080, NAS1025N K2000 MS21051, NAS682A, NAS1025A MK2000 MS21071, NAS696A Elastic-Insert Anchor Nut All Metal Anchor Nut (K1000-...

1/2" 100° 600-Piece Screw Pack Flat Phillips AN507C Machine Screws Flat Phillip Sheet Metal Screws 100 6-32 x 1/2 10...

These bolts supercede NAS1104 high strength bolts. Thread 1/4-28 For Drilled Shank add "D" at end of .

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless gro...

These bolts supercede NAS1104 high strength bolts. Thread 1/4-28 For Drilled Shank add "D" at end of .

Fabricated from steel and cadmium plated per QQ-P-416A, Type II, Class 3. AN310 castle nuts are used with drilled-shank bolts, clevis bolts, eye b...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Phillips Pan Head Alloy Steel (8740) Finish - Cadmium per QQ-P-416 Tensile - 160,000 - 180,000 PSI

NAS514P1032-4P