Hardware

Pan head low alloy steel machine screws have 125,000 to 145,000 psi tensile strength with cadmium plate finish to QQP416, Type 2, Class 3. MS27039...

MS16628-4078 External Bowed Retaining Ring.

Union, Flared Tube

All s will follow this format: AN###. To further distinguish between the s, you'll notice that a dash ("-") has been added, followed by some ...

All items are surplus and no longer available once stock is gone. Traceability not available

These non-structural screws have a flat countersunk head, 100° cross recessed head. (-C #'s) Cleaned and descaled, corrosion restistant ste...

Includes 26 studs and 26 retainers. Cessna 172 Stainless Steel Cowl Set Dimensions: .75X1.25X6

Installation hole size for the A-T Series Insert is determined by the parent material's thickness and density. The thicker the material the larger...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless gro...

REDUCER, External Thread

2700 STUD LENGTH SELECTION Total material thickness G consists of the thickness of all materials to be fastened. This must include the thickness ...

SLEEVE, Coupling Black- Steel Blue-Aluminum

Hardened steel screws to make permanent fastenings to ferrous and non-ferrous castings, heavy gauge steel,...

Tapered Caplugs can be used as either caps or plugs. Because they are tapered in design and made from highly pliable (or...

Truss-head non-structural machine screws made of carbon steel, cadmium plated. Minimum tensile strength 55,000 PSI. Available in slot head or Phi...

MS24665 cotter pins are stocked in cadmium plated steel (formerly AN380) in the priced sizes listed above. Other sizes available on special order....

All s will follow this format: AN###. To further distinguish between the s, you'll notice that a dash ("-") has been added, followed by some ...

High-strength machine screws fabricated from alloy steel per specification QQ-S-689. Tensile strength 125,000 PSI. Cadmium plated per QQ-P-416A,...

CLoc® 2000 Series Stainless. 300lb Light duty fastening system. (No separate Grommet) 3/32 rivet, .750 spacing

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Note: All AN173-AN175 bolts listed are drilled shank. Please contact our sales department by for price and availability of undrilled bolts. No...

ELBOW, Flared Tube Bulkhead and Universal, 90°