Hardware

Use screws for all panel installations to eliminate magnetic interference. Finish: Black Oxide Drive Type: Phillips

Series SC sleeve caps are designed to fit outside diameters of tubing sizes listed with a snug friction grip. Available ...

This tool is for standard retainers in the #82 Line of DZUS Push-On Retainers / Fasteners. Please use 82-0-7595-11 for split retainers.

Clevis bolts have a slotted brazier type head. They are special-purpose bolts for use where a large shearing stress occurs (never in tension). M...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless gro...

Clevis bolts have a slotted brazier type head. They are special-purpose bolts for use where a large shearing stress occurs (never in tension). M...

Eye bolts are special purpose bolts to be used where external tension loads are to be applied. The eye is designed for attachment of such devic...

ELBOW, Flared Tube Bulkhead and Universal, 90° Dimensions: .5X1.125X2

1/4" hose barb non-valved panel mount coupling body.Dimensions: .875X.875X2

AN503 Fillister Head Screws AN503 (coarse thread) drilled head, slotted fillister head screws are fabricated from steel meeting specification ...

Type: NAS387 Material: Carbon Steel Type 1016 - 1024 Finish: Nickel Plate (PDF)

Wire clamps for solid wire controls for Cessna Aircraft. Wire clamps are used on solid wire controls including cabin air, mixture control, strain...

Set screws are used to provide immediate, binding location of various parts on shafts. Maximum h...

REDUCER, External Thread Dimensions: .85X.85X1.36

Material - Alloy Steel (8740) Heat Treat - 160,000 - 180,000 PSI Finish - Cadmium Per QQ-P-416 Type II

Note: quantities must be entered in decimal format. (i.e. 0.25 for 1/4, 0.50 for 1/2, etc). Minimum Purchase 1/8 lb. (qty .13). "A" rivets are "so...

These pan head low alloy steel machine screws have 125,000 to 145,000 psi tensile strength w/cadmium plate finish to QQ-P-416, Type 2, Class 3. MS...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

CLoc® 2000 Series Stainless. 300lb Light duty fastening system. (No separate Grommet) 3/32 rivet, .750 spacing

Pan head low alloy steel machine screws have 125,000 to 145,000 psi tensile strength with cadmium plate finish to QQP416, Type 2, Class 3. MS27039...

Made of alloy steel per specification MIL-P-5673 and cadmium plated per QQ-P-416A, Type lI, Class 3. Provided with drilled hole for cotter...

Heres an easy way to put steel threads in wood, plastic, or particleboard. Just drill a hole to fit the barrel, insert tee nut, and ...