Hardware

Assorted New Surplus AN Fittings

These precision-made nuts are reliable and economical fastening devices The fiber insert gives a friction grip on the threads of the ...

Truss-head non-structural machine screws made of carbon steel, cadmium plated. Minimum tensile strength 55,000 PSI. Available in slot head or Phi...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Thimble Bushings are a precision molded nylon insert that helps elminate thimble elongation under load to maintain correct cable length and tensio...

These non-structural screws have a flat countersunk head, 100° cross recessed head. (-C #'s) Cleaned and descaled, corrosion restistant ste...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Phillips Pan Head Alloy Steel (8740) Finish - Cadmium per QQ-P-416 Tensile - 160,000 - 180,000 PSI

CAD-PLATED (MS35650) STAINLESS (MS35650) BRASS (MS35650) Less 20% for quantity 100/Part No.

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Eye bolts are special purpose bolts to be used where external tension loads are to be applied. The eye is designed for attachment of such devic...

Kit contains Southco or Camloc studs, washers, retainers & a push tool for the Southco studs. Receptacles for Camloc or Southco fasteners are ...

Series P pipe pluge are square head. They are molded in high density polyethylene and are ideal for keeping moisture, dirt and other ...

AN924 (Aluminum - Anodize Blue) NUT, Flared Tube, Bulkhead and Universal Fitting

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Made of alloy steel per specification MIL-P-5673 and cadmium plated per QQ-P-416A, Type lI, Class 3. Provided with drilled hole for cotter...

Truss-head non-structural machine screws made of carbon steel, cadmium plated. Minimum tensile strength 55,000 PSI. Available in slot head or Phi...

AN365C Nut Kit Stainless 200 Pieces 50 -632 25 -428 50 -832 25 -524 50 -1032 AN365 Nut Kit Cad-Plated 400 Pieces ...

Note: quantities must be entered in decimal format. (i.e. 0.25 for 1/4, 0.50 for 1/2, etc). Minimum Purchase 1/8 lb. (qty .13). "A" rivets are "so...

Attention: Avdel has changed the mandrel design for some of their Cherry "N" Rivets. The change has not effected the strength of the rivet. CHE...

Truss Head Type A Stainless