Hardware

Nylo-Seal tube fittings are exceptionally strong. The bodies, made of nylon, are stronger than machined fittings of similar composition. They are ...

NAS6603 Shear BoltsThread 10-32

Truss Head Type A Stainless

Hose Elbow - Pipe Thread, 90°

Clevis bolts have a slotted brazier type head. They are special-purpose bolts for use where a large shearing stress occurs (never in tension). M...

"AD" indicates Hard 2117 aluminum alloy. These rivets are heat treated and have a minimum tensile strength of 38,000 PSI. "A" indicates Soft 100 p...

Zinc-plated Steel (Use slotted screws for antiques)

Series RCL caps are ideal for protecting threaded or smooth cylindrical surfaces. Originally designed for ...

AN960 flat washers are used under hex nuts to provide a smooth bearing surface, as shims to obtain the correct grip length for a bolt an...

Phillips Pan Head Alloy Steel per MIL-S-6049 Finish - Cadmium per QQ-P-416 Type II Tensile - 160,000 - 180,000 PSI

These brass elbows and tees provide flexibility in the routing of lines which terminate in male pipe threads.

Material - 4130 Alloy Steel Per AMS-S-6758 Finish - Cad Type II, Class 2 Per AMS-QQ-P-416 Heat Treat- 150 KSI Min Per AMS2759 Hardness - 34-...

Made of alloy steel per specification MIL-P-5673 and cadmium plated per QQ-P-416A, Type lI, Class 3. Provided with drilled hole for cotter...

AN924 (Stainless Steel) NUT, Flared Tube, Bulkhead and Universal Fitting

Attention: Avdel has changed the mandrel design for some of their Cherry "N" Rivets. The change has not effected the strength of the rivet. CHE...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless gro...

AN565 Set Screws

Manufactured of carbon steel, cadmium plated per QQ-P-416C, Type II, Class 2. They provide a greater bearing area than AN960 washers. ...

Made of alloy steel per specification MIL-P-5673 and cadmium plated per QQ-P-416A, Type lI, Class 3. Provided with drilled hole for cotter...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

These brass elbows and tees provide flexibility in the routing of lines which terminate in male pipe threads.

MS35338 split, helical lock washers are made of carbon steel, cadmium plated per QQ-P-416A, Type II, Class 3. They replace the AN935 medium-weight...

Phillips 100° Flat Head Tensile 160,000 180,000 PSI Alloy Steel Per MIL-S-6049 Finish - Cadmium per QQ-P-416, Type II

Floating Clip Nut 4972-1032.