Hardware

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Note: quantities must be entered in decimal format. (i.e. 0.25 for 1/4, 0.50 for 1/2, etc). Minimum Purchase 1/8 lb. (qty .13). "A" rivets are "so...

Heat treated, cadmium plated steel with dry film lubricant applied. Self-locking. Standard temp. to 450º. W at the end of the NAS number indicates...

Tri-Slot 100 Deg Flat Head, Close Tolerance Material - Alloy Steel (8740) Heat Treat - 160,000 - 180,000 Finish - Cadmium Per AmsQQ-P-416 T...

Nylo-Seal tube fittings are exceptionally strong. The bodies, made of nylon, are stronger than machined fittings of similar composition. They are ...

Brass compression fittings to be used with standard or high pressure NSR hose.

Ctsk Head Blind - Alum./Steel. Closed End 1/8 X .063 -.125 Grip

Use screws for all panel installations to eliminate magnetic interference. Finish: Black Oxide

MS20073/MS20074 Engine Bolts

CLoc® 4000 Series Fasteners SK4002S Collared Slot Stainless & SK40S5S Phillips Head Diamond head Stainless Rc 27 Anti-Gall TSO-C148 1050...

Series PD Plugs, designed for use on flared JIC fittings, air knurled for ease of application. They will seal low pressu...

Clevis bolts have a slotted brazier type head. They are special-purpose bolts for use where a large shearing stress occurs (never in tension). M...

These non-structural screws have a flat countersunk head, 100° cross recessed head. (-C #'s) Cleaned and descaled, corrosion restistant ste...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Nylo-Seal tube fittings are exceptionally strong. The bodies, made of nylon, are stronger than machined fittings of similar composition. They are ...

SOUTHCO PUSH-ON RETAINER designed for installation using the retainer tool in "Accessories". SOUTHCO SPLIT RING RETAINER Can be installed by ha...

Pan head low alloy steel machine screws have 125,000 to 145,000 psi tensile strength with cadmium plate finish to QQP416, Type 2, Class 3. MS27039...

Factory New Lycoming Bolts.Dimensions: .75X.5X.75

To select the proper length stud, first select the grommet, for example 4002-G. Next, select the receptacle, such as 214-16. Afte...

NAS517-2-1 Alloy Screw

Made of alloy steel per specification MIL-P-5673 and cadmium plated per QQ-P-416A, Type lI, Class 3. Provided with drilled hole for cotter...

National Aeronautical Standard Flat NAS1515 series washer. Made out of Plastic Polyhexamethylene Adipamide Overall.

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Eye bolts are special purpose bolts to be used where external tension loads are to be applied. The eye is designed for attachment of such devic...