Hardware

Note: All AN173-AN175 bolts listed are drilled shank. Please contact our sales department by for price and availability of undrilled bolts. No...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

These bolts supercede NAS1105 high strength bolts Thread 5/16-24 For Drilled Shank add "D" at end of .

MS24665 cotter pins are stocked in cadmium plated steel (formerly AN380) in the priced sizes listed above. Other sizes available on special order....

(PDF) CAD Plated fasteners are no longer available due to enviromental reasons. ( * ) :No longer available after our current stock is deplete...

Phillips Pan Head Alloy Steel per MIL-S-6049 Finish - Cadmium per QQ-P-416 Type II Tensile - 160,000 - 180,000 PSI

A full grommet is used when protection of the hole is a definite consideration. It protects panel finish and reduces stud play. A tool is required...

PLUG AND BLEEDER, Screw Thread

82° finishing washers are used in non-structural interior and upholstery applications. The parts covered by NAS390 & NAS391 ar...

Note: quantities must be entered in decimal format. (i.e. 0.25 for 1/4, 0.50 for 1/2, etc). Minimum Purchase 1/8 lb. (qty .13). "A" rivets are "so...

Series PDF plugs are designed for easy mechanical or hand installation on flat-faced O-ring fittings.

MS21207 Stainless steel 100 Degree Flat Head Type B screws.

Split Ring Hand or tool installation. Stainless steel. P/N 85-34-101-20 Push-On Tool installat...

Use screws for all panel installations to eliminate magnetic interference. Finish: Black Oxide

NIPPLE, Flared Tube and Pipe Thread Dimensions: .5X.5X1.25

"A" rivets are "soft". They are fabricated from 1100-grade aluminum and have a tensile strength of 16,000 PSI. "AD" rivets are fabricated from 211...

Attention: Avdel has changed the mandrel design for some of their Cherry "N" Rivets. The change has not effected the strength of the rivet. CHE...

P/N 04-00300 2000 Washers, 700 Cotter Pins - 31 Items, individually packaged, with a 26-drawer cabinet included. A combo of flat washers in stee...

Note: quantities must be entered in decimal format. (i.e. 0.25 for 1/4, 0.50 for 1/2, etc). Minimum Purchase 1/8 lb. (qty .13). "A" rivets are "so...

2600/2700 STUD LENGTH SELECTION Total material thickness G consists of the thickness of all materials to be fastened. This must include the thick...

"A" rivets are "soft". They are fabricated from 1100-grade aluminum and have a tensile strength of 16,000 PSI. "AD" rivets are fabricated from 211...

Fabricated from steel and cadmium plated per QQ-P-416A, Type II, Class 2. The AN315 plain hex nut is of rugged construction and can carry the same...