Hardware

Zinc-plated Steel (Use slotted screws for antiques)

These non-structural screws have a flat countersunk head, 100° cross recessed head. (-C #'s) Cleaned and descaled, corrosion restistant ste...

Phillips pan head 300 Series stainless steel Finish - Passivate per QQ-P-35

Pan head low alloy steel machine screws have 125,000 to 145,000 psi tensile strength with cadmium plate finish to QQP416, Type 2, Class 3. MS27039...

"A" rivets are "soft". They are fabricated from 1100-grade aluminum and have a tensile strength of 16,000 PSI. "AD" rivets are fabricated from 211...

Stainless Steel Stop Nut

Truss-head non-structural machine screws made of carbon steel, cadmium plated. Minimum tensile strength 55,000 PSI. Available in slot head or Phi...

"A" rivets are "soft". They are fabricated from 1100-grade aluminum and have a tensile strength of 16,000 PSI. "AD" rivets are fabricated from 211...

Split Ring Hand or tool installation. Stainless steel. P/N 85-34-101-20 Push-On Tool installat...

These bolts supercede NAS1105 high strength bolts Thread 5/16-24 For Drilled Shank add "D" at end of .

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Phillips 82° Flat Head Stainless Steel

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

These pan head low alloy steel machine screws have 125,000 to 145,000 psi tensile strength w/cadmium plate finish to QQ-P-416, Type 2, Class 3. MS...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

All s will follow this format: AN###. To further distinguish between the s, you'll notice that a dash ("-") has been added, followed by some ...

Installation hole size for the A-T Series Insert is determined by the parent material's thickness and density. The thicker the material the larger...

Screw, Phillips Hex Head Material - A-286 Corrosion Resisting Steel Finish - Passivate Per QQ-P-35

MS24665 cotter pins are stocked in passivated corrosion resisting stainless steel (formerly AN381) in the priced sizes listed above. Other sizes a...

Note: quantities must be entered in decimal format. (i.e. 0.25 for 1/4, 0.50 for 1/2, etc). Minimum Purchase 1/8 lb. (qty .13). "A" rivets are "so...

The Rivet Nut is a one-piece internally threaded and counterbored tubular aluminum rivet that can be pulled up or headed while working entirely fr...

NAS514P1032-4P

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless gro...

Eye bolts are special purpose bolts to be used where external tension loads are to be applied. The eye is designed for attachment of such devic...