Hardware

82° finishing washers are used in non-structural interior and upholstery applications. The parts covered by NAS390 & NAS391 ar...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

AN503-10-10 Screw

Snaps over edge of panels or into center hole locations. Holds itself in place for blind assembly. "Floats" free for easy hole al...

2600 STUD LENGTH SELECTION Total material thickness G consists of the thickness of all materials to be fastened. This must include the thickness ...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Screw Thread Inserts - Self Locking Material - Stainless Steel Per NASM8846 Finish - Plain, Dyed Red Or Dry Film Lube (L) Per AS5272

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Made of alloy steel per specification MIL-P-5673 and cadmium plated per QQ-P-416A, Type lI, Class 3. Provided with drilled hole for cotter...

Clevis bolts have a slotted brazier type head. They are special-purpose bolts for use where a large shearing stress occurs (never in tension). M...

Manufactured of carbon steel, cadmium plated per QQ-P-416C, Type II, Class 2. They provide a greater bearing area than AN960 washers. ...

P60493 Aluminum Rivet - Aluminum Mandrel. 3/16 diameter x 5/8 head x 3/8 to 1/2 range. Blind open end pop rivets are available in a variety of siz...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

These structural screws have a 100° countersunk head. Cadmium plated per QQ-P-416A, Type II, Class 3. Minimum tensile strength for steel is 125,...

A full grommet is used when protection of the hole is a definite consideration. It protects panel finish and reduces stud play. A tool is required...

AN565 Set Screws

NAS514P1032-4P

AN822 (MS20822) ELBOW, Flared Tube and Pipe Thread, 90°

Screw, Phillips Hex Head Material - A-286 Corrosion Resisting Steel Finish - Passivate Per QQ-P-35

Made of alloy steel per specification MIL-P-5673 and cadmium plated per QQ-P-416A, Type lI, Class 3. Provided with drilled hole for cotter...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

These structural screws have a 100° countersunk head. Cadmium plated per QQ-P-416A, Type II, Class 3. Minimum tensile strength for steel is 125,...

Individual Airplane Exterior Screw Kits These kits do not include any structural screws.Dimensions: 1.5X3X5

Fabricated from steel and cadmium plated per QQ-P-416A, Type II, Class 2. The AN315 plain hex nut is of rugged construction and can carry the same...