Hardware

All s will follow this format: AN###. To further distinguish between the s, you'll notice that a dash ("-") has been added, followed by some ...

Flared tube plugs are available in steel or aluminum alloy.

Made of alloy steel per specification MIL-P-5673 and cadmium plated per QQ-P-416A, Type lI, Class 3. Provided with drilled hole for cotter...

AN960 flat washers are used under hex nuts to provide a smooth bearing surface, as shims to obtain the correct grip length for a bolt an...

Stainless Steel Stop Nut

The SK2003A Series Mounts were specifically designed around the latest generation Cessna/Lord J7444-42 Series Mount. The SK2003-14A, -24A, an...

ms24693c296 SS Machine Screw

Factory New Lycoming Bolts.

Zinc-Plated, Truss Head Type A (Pointed Tip Screw) & Type B (Blunt Tip Screw).

Fabricated from steel and cadmium plated per QQ-P-416A, Type II, Class 3. AN310 castle nuts are used with drilled-shank bolts, clevis bolts, eye b...

These pan head machine screws have 55,000 psi minimum tensile strength and are cadmium plated to Specification QQ-P-416, Type 2, Class 3. Manufa...

Fabricated from steel and cadmium plated per QQ-P-416A, Type II, Class 2. The AN315 plain hex nut is of rugged construction and can carry the same...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

These pan head machine screws feature 60,000 psi min. tensile strength & are cadmium plated to specification QQ- P-416, Type 2, Class 3. Manuf...

Automatically sizes all AN bolts up to 5/8" diameter and 5 inches long.Dimensions: .25X5X6

AN503-10-10 Screw

Coarse Thread - Use brass type for instruments AN340 CAD-PLATED (MS35649) AN340C STAINLESS (MS35649) AN340B BRASS (MS35649) AN340 COARSE...

Phillips Hex Head Alloy Steel per MIL-S-6049 Finish - Cadmium per QQ-P-416 Type II Tensile - 160,000 - 185,000 PSI

Wire clamps for solid wire controls for Cessna Aircraft. Wire clamps are used on solid wire controls including cabin air, mixture control, strain...

Factory New Lycoming Bolts.

A full grommet is used when protection of the hole is a definite consideration. It protects panel finish and reduces stud play. A tool is required...

UNION, Flared Tube Bulkhead and Universal Dimensions: 1.6X1.6X3

Note: quantities must be entered in decimal format. (i.e. 0.25 for 1/4, 0.50 for 1/2, etc). Minimum Purchase 1/8 lb. (qty .13). "A" rivets are "so...

MS24665 cotter pins are stocked in passivated corrosion resisting stainless steel (formerly AN381) in the priced sizes listed above. Other sizes a...