Hardware

ELBOW, Flared Tube Bulkhead and Universal, 90°

Made of alloy steel per specification MIL-P-5673 and cadmium plated per QQ-P-416A, Type lI, Class 3. Provided with drilled hole for cotter...

Hose and tubing Insert Fittings are available in high density Black Polyethylene or White Nylon. Use polyethylene fittings with Tygon, n...

"AD" indicates Hard 2117 aluminum alloy. These rivets are heat treated and have a minimum tensile strength of 38,000 PSI. "A" indicates Soft 100 p...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

Our aluminum manifold fittings are a bolt-on design with taper pipe threads. These fittings are designed to...

Our aluminum manifold fittings are a bolt-on design with taper pipe threads. These fittings are designed to...

High-strength machine screws fabricated from alloy steel per specification QQ-S-689. Tensile strength 125,000 PSI. Cadmium plated per QQ-P-416A,...

(PDF) CAD Plated fasteners are no longer available due to enviromental reasons. ( * ) :No longer available after our current stock is deplete...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

High-strength machine screws fabricated from alloy steel per specification QQ-S-689. Tensile strength 125,000 PSI. Cadmium plated per QQ-P-416A,...

82° Oval Head Type A Sheet Metal Screw

Note: quantities must be entered in decimal format. (i.e. 0.25 for 1/4, 0.50 for 1/2, etc). Minimum Purchase 1/8 lb. (qty .13). "A" rivets are "so...

Phillips Pan Head Alloy Steel per MIL-S-6049 Finish - Cadmium per QQ-P-416 Type II Tensile - 160,000 - 180,000 PSI

These pan head machine screws have 55,000 psi minimum tensile strength and are cadmium plated to Specification QQ-P-416, Type 2, Class 3. Manufa...

Use slotted type for antiques.

CAD-PLATED (MS35650) STAINLESS (MS35650) BRASS (MS35650) Less 20% for quantity 100/Part No.

The dash number represents the height ("H" dimension) of the spring. EXAMPLE: S3-150 = .150. All Dzus® products are available. Request quote on u...

Use screws for all panel installations to eliminate magnetic interference. Finish: Black Oxide Drive Type: Phillips

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

MS24665 cotter pins are stocked in passivated corrosion resisting stainless steel (formerly AN381) in the priced sizes listed above. Other sizes a...

Made of alloy steel per specification MIL-P-5673 and cadmium plated per QQ-P-416A, Type lI, Class 3. Provided with drilled hole for cotter...

Phillips Pan Head Alloy Steel (8740) Finish - Cadmium per QQ-P-416 Tensile - 160,000 - 180,000 PSI

High-strength machine screws fabricated from alloy steel per specification QQ-S-689. Tensile strength 125,000 PSI. Cadmium plated per QQ-P-416A,...