Hardware

These 82 degree flat head machine screws have 55,000psi minimum tensile strength and feature cadmium plate finish per QQ P-416, Type 2, Class 3....

Static dissipative EC Series Cap Plugs provide positive ESD and physical protection for all common sizes of th...

Zinc-Plated, Truss Head Type A (Pointed Tip Screw) & Type B (Blunt Tip Screw).

Provide efficient locking action by spring tension and biting action of tapered twisted teeth. Made of 1050 spring steel and cadmium plated per sp...

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground...

P60487 Aluminum Rivet - Aluminum Mandrel. 3/16 diameter x 3/8 head x 1/16 to 1/8 range. Blind open end pop rivets are available in a variety of si...

Avex non-structural blind rivets, with aluminum body and steel stem, are similar to the Cherry BSP and BSC rivets. We stock the standard dome h...

Clevis bolts have a slotted brazier type head. They are special-purpose bolts for use where a large shearing stress occurs (never in tension). M...

Phillips 82° Flat Head Stainless Steel

Phillips Hex Head Alloy Steel per MIL-S-6049 Finish - Cadmium per QQ-P-416 Type II Tensile - 160,000 - 185,000 PSI

Fabricated from steel and cadmium plated per QQ-P-416A, Type II, Class 2. The AN315 plain hex nut is of rugged construction and can carry the same...

Phillips pan head 300 Series stainless steel Finish - Passivate per QQ-P-35

High-strength machine screws fabricated from alloy steel per specification QQ-S-689. Tensile strength 125,000 PSI. Cadmium plated per QQ-P-416A,...

Type: MS51861 Material: Carbon Steel Type 1016 - 1024 Finish: CAD TYPE II (PDF)

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless gro...

Avex non-structural blind rivets, with aluminum body and steel stem, are similar to the Cherry BSP and BSC rivets. We stock the standard dome h...

Cable exit bushing: Flange OD 5/8" Bushing OD 3/8" ID 1/4"

All s will follow this format: AN###. To further distinguish between the s, you'll notice that a dash ("-") has been added, followed by some ...

Fabricated from steel and cadmium plated per QQ-P-416A, Type II, Class 2. The AN315 plain hex nut is of rugged construction and can carry the same...

Our aluminum manifold fittings are a bolt-on design with taper pipe threads. These fittings are designed to...

Clevis bolts have a slotted brazier type head. They are special-purpose bolts for use where a large shearing stress occurs (never in tension). M...

These structural screws have a 100° countersunk head. Cadmium plated per QQ-P-416A, Type II, Class 3. Minimum tensile strength for steel is 125,...

AN7 Bolts New Surplus.

Stainless Steel Stop Nut